Desing and construction of temperature measurement and control device up to 1200 C

Download
1985
Güler, Nihal Fatma

Suggestions

Desing, manufacture and experimental evaluation of a wind tunnel balance
Toksoy, Selil; Kavsaoğlu, Mehmet Ş.; Department of Aeronautical Engineering (1990)
Desing of a testability improved multi-processor step motor controller system.
Aydın, Kubilay Kaan; Department of Electrical and Electronics Engineering (1992)
Desing of an engine mount with dry friction damping
Boral, Caner; Ciğeroğlu, Ender; Department of Mechanical Engineering (2010)
Automotive engine mounts are used to support engine weight, protect engine from road inputs and isolate transmission of vibrations created by the engine, which has a drastic effect on the noise generated inside the passenger cabin. Most common types of engine mounts are elastomeric and hydraulic mounts, the former having better vibration isolation characteristics whereas the latter displays better shock isolation. Elastomeric mounts are widely used for their low initial cost, while hydraulic mounts with ine...
Planing a quality system for high voltage testing laboratories
Çetin, Fatih; Arıkan, Yıldız; Department of Electrical and Electronics Engineering (1999)
Pitting corrosion in base metal dental casting alloys
Alanyalıoğlu, Tevfik Alp; Doruk, Mustafa; Department of Metallurgical Engineering (1994)
Citation Formats
N. F. Güler, “Desing and construction of temperature measurement and control device up to 1200 C,” Middle East Technical University, 1985.