Desing, manufacture and experimental evaluation of a wind tunnel balance

Download

008178.pdf

Date

1990

Author

Toksoy, Selil

Metadata

Show full item record

Item Usage Stats

55
views

0
downloads

URI

https://hdl.handle.net/11511/3807

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Desing and construction of temperature measurement and control device up to 1200 C Güler, Nihal Fatma; Sarıtaş, Müzeyyen; Department of Electrical and Electronics Engineering (1985)
Desing of a testability improved multi-processor step motor controller system. Aydın, Kubilay Kaan; Department of Electrical and Electronics Engineering (1992)
Desing of an engine mount with dry friction damping Boral, Caner; Ciğeroğlu, Ender; Department of Mechanical Engineering (2010) Automotive engine mounts are used to support engine weight, protect engine from road inputs and isolate transmission of vibrations created by the engine, which has a drastic effect on the noise generated inside the passenger cabin. Most common types of engine mounts are elastomeric and hydraulic mounts, the former having better vibration isolation characteristics whereas the latter displays better shock isolation. Elastomeric mounts are widely used for their low initial cost, while hydraulic mounts with ine...
Planing a quality system for high voltage testing laboratories Çetin, Fatih; Arıkan, Yıldız; Department of Electrical and Electronics Engineering (1999)
Desulphurization characteristics of ladle furnace slags of a low sulphur steel Keskinkilic, E.; Geveci, Ahmet; Topkaya, Yavuz Ali (2007-10-01) In steelmaking, one of the most important parameters for desulphurization is the oxygen potential of the system which can be expressed either by oxygen activity of the steel or by FetO activity of the slag. Removal of sulphur from the steel is enhanced when FetO activity of the slag and thus oxygen activity of the steel decreases. In this paper, ladle furnace slags of a low S steel quality currently produced in Eregli Iron and Steel Works Company (ERDEMIR), Turkey, were studied. Activity coefficients of Fet...

Citation Formats

S. Toksoy, “Desing, manufacture and experimental evaluation of a wind tunnel balance,” Middle East Technical University, 1990.