Design of a multiprocessing realtime kernel on EECB bus

Download

029559.pdf

Date

1993

Author

Özköse, Özgü

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/11844

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design of a Resonator-on-Microchannel (RoM) for Gravimetric Detection Applications in Liquid Environment Kangul, M.; AYDIN GÖL, EBRU; Gökce, Fuat; Toral, T.; Zorlu, O.; Külah, Haluk (Elsevier BV; 2016-09-07) This paper presents a novel biosensor structure consisting of a resonator placed at the top wall of a microchannel (Resonator-on-Microchannel: RoM). The proposed biosensor structure is aimed to be used for real-time gravimetric detection of microscale biological targets in liquid environment by tracking the resonance frequency change of the system as the sought particles/cells are attached to the resonator surface. The damping effects are minimized with the help of the proposed resonator placement as well a...
Design of a ZVS QRC converter for educational test bench Şengüzel, İsmail; Üçtuğ, Yıldırım; Department of Electrical and Electronics Engineering (2006) In this thesis, the conventional pulse-width modulated (PWM) and zero-voltage switching (ZVS) quasi-resonant buck converters are analyzed and a variable-frequency control technique is proposed to regulate the output voltage due to the immediate input line and load changes. The quasi-resonant technique provides favorable switching conditions for active switch to reduce switching losses and electromagnetic interference (EMI). The method is based on shaping the voltage across the active switch in quasisinusoid...
Design of a microprocessor controlled 3-D workbench Dayanç, Koray; Bulut, Mehmet Mete; Department of Electrical and Electronics Engineering (1999)
Design of an image acquisition setup for mimic tracking Aköner, Özgüler Mine; Koku, Ahmet Buğra; Department of Mechanical Engineering (2007) With the advances in computer technology and the changing needs of people’s daily lives, robots start to offer alternative solutions. As one of these solutions, the branch of humanoid robots emerged as advanced robots that can interact with people. Robot faces are one of the most effective means of interacting with people; since they can express their emotions and reactions through facial mimics. However, the development of realistic robot faces necessitates the knowledge of the trajectories and displacemen...
Design of a controller for image stabilization Eroğlu, Rafet; Kocaoğlan, Erol; Department of Electrical and Electronics Engineering (2000)

Citation Formats

Ö. Özköse, “Design of a multiprocessing realtime kernel on EECB bus,” Middle East Technical University, 1993.