Design of a controller for image stabilization

Download
2000
Eroğlu, Rafet

Suggestions

Design of a circular microphone array for panoramic audio recording and reproduction Array radius
Hacıhabiboğlu, Hüseyin; Cvetkovic, Zoran (null; 2010-05-22)
A multichannel audio system proposed by Johnston and Lam aims at the perceptual reconstruction of the sound field of an acoustic performance in its original venue. The system employs a circular microphone array, of 31cm diameter, to capture relevant spatial cues. This design proved to be effective in the rendition of the auditory perspective, however other studies showed that there is still substantial room for improvement. This paper investigates the impact of the array diameter on the width and naturalnes...
Design of a Resonator-on-Microchannel (RoM) for Gravimetric Detection Applications in Liquid Environment
Kangul, M.; AYDIN GÖL, EBRU; Gökce, Fuat; Toral, T.; Zorlu, O.; Külah, Haluk (Elsevier BV; 2016-09-07)
This paper presents a novel biosensor structure consisting of a resonator placed at the top wall of a microchannel (Resonator-on-Microchannel: RoM). The proposed biosensor structure is aimed to be used for real-time gravimetric detection of microscale biological targets in liquid environment by tracking the resonance frequency change of the system as the sought particles/cells are attached to the resonator surface. The damping effects are minimized with the help of the proposed resonator placement as well a...
Design of an inertia measurement device for stores
Kılıç, Berkay; Dal, Hüsnü; Tüzün, Aydın; Department of Mechanical Engineering (2018)
In this thesis, design of a device, which can measure mass properties of missiles or their sub-components in a single test setup, is expressed. An object, whose mass properties are going to be calculated, is attached to the device and three-dimensional, oscillatory motion about a specific point is supplied to that object. During this motion, velocity and acceleration values of the object are measured simultaneously with the force and torque values at the connection point. Mass properties of the object are c...
Design of an electromagnetic classifier for spherical targets
Ayar, Mehmet; Sayan, Gönül; Department of Electrical and Electronics Engineering (2005)
This thesis applies an electromagnetic feature extraction technique to design electromagnetic target classifiers for conductors, dielectrics and dielectric coated conductors using their natural resonance related late-time scattered responses. Classifier databases contain scattered data at only a few aspects for each candidate target. The targets are dielectric spheres of varying sizes and refractive indices, perfectly conducting spheres varying sizes and dielectric coated conducting spheres of varying refra...
Design of a shock absorber for weapon systems
Canik, Erdem; Çalışkan, Mehmet; Department of Mechanical Engineering (2014)
Shock absorbing pistons, as the absorbers of the instantaneous shocks and the recoil forces of weapon systems embodying them, are subjected to very high forces. The pistons are required not only to decrease the recoil forces down to favorable values for the other components of the system to function properly and the operator to operate the system comfortable, but also they should not be destructively rigid considering the dynamics of the weapons. The majority of the shock absorber producers in the local mar...
Citation Formats
R. Eroğlu, “Design of a controller for image stabilization,” Middle East Technical University, 2000.