The effect of double austenitization on microstructure and fracture toughness of AISI M2 high speed steel

Download
008200.pdf
1990
Ögel, Bilgehan
Show full item record
29
views
0
downloads
Austenitic steel., Steel
https://hdl.handle.net/11511/11904
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The Expertise Effect on Web Accessibility Evaluation Methods
Brajnik, Giorgio; Yesilada, Yeliz; Harper, Simon (2011-01-01)
Web accessibility means that disabled people can effectively perceive, understand, navigate, and interact with the web. Web accessibility evaluation methods are needed to validate the accessibility of web pages. However, the role of subjectivity and of expertise in such methods is unknown and has not previously been studied. This article investigates the effect of expertise in web accessibility evaluation methods by conducting a Barrier Walkthrough (BW) study with 19 expert and 57 nonexpert judges. The BW m...
Effect of bottom stirring on basic oxygen steelmaking
Bilgiç, Çağrı Doğan; Sevinç, Naci; Department of Metallurgical and Materials Engineering (2016)
ERDEMİR Steel Plant produces wide range of alloy steel for various industries. Main demand of industries for steel is high quality end product with lower prices. One of the criterion affecting not only the steel cleanliness and also price of the product is bottom stirring in basic oxygen steelmaking. The objective of this study is to investigate effects of bottom stirring on basic oxygen steelmaking. With this objective, process parameters, analysis of produced heats were investigated to determine effects o...
The effect of loading rate, temperature and crack length on fracture initiation toughness in a low strength steel.
Arıkan, Rafet; Doruk, Mustafa; Department of Metallurgical Engineering (1982)
The comparison of microstructure and mechanical properties of a low carbon bainitic forging steel after isothermal transformation and direct cooling
Balcılar, Muhammed Mustafa; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2022-4-27)
Bainitic forging steels have emerged in recent decades as an alternative to Quench and Temper steels due to their low cost and energy requirements and optimum combination of strength, ductility, and toughness. Although effect of continuous cooling on bainitic forging steels have been studied, the effect of isothermal transformation on microstructure and mechanical properties of microalloyed bainitic forging steels is an open field. A low carbon microalloyed bainitic forging steel is examined in this study, ...
Microstructure control of AISI 4135 for optimization of fatigue and fracture performance
Özcan, Burak; Gür, Cemil Hakan; Yurtışık, Koray; Department of Metallurgical and Materials Engineering (2018)
Avoiding early fatigue failure of the AISI 4135 steel shafts in trains is an important task. This study aims to improve the damage tolerance of AISI 4135 steel by modifying its microstructure via heat treatment. The overall effect of various heat treatment procedures on the damage tolerance was analyzed by considering the threshold stress intensity factor and fatigue strength. Detailed investigations on the mechanical properties were performed, and fracture surfaces were investigated. The resistance of the ...
Citation Formats
B. Ögel, “The effect of double austenitization on microstructure and fracture toughness of AISI M2 high speed steel,” Ph.D. - Doctoral Program, Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr