Steady-state and transient performance analyses of a double output induction generator operating at subsynchronous and supersynchronous speeds

Download
1994
Çadırcı, Işık

Suggestions

Transient and steady-state modeling and closed-loop control of slip-energy recovery drive.
Akpınar, Eyüp; Ersak, Aydın; Department of Electrical and Electronics Engineering (1991)
Implementation of a vector controlled induction motor drive
Acar, Akın; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2004)
High dynamic performance, which is obtained from dc motors, became achievable from induction motors with the recent advances in power semiconductors, digital signal processors and development in control techniques. By using field oriented control, torque and flux of the induction motors can be controlled independently as in dc motors. The control performance of field oriented induction motor drive greatly depends on the correct stator flux estimation. In this thesis voltage model is used for the flux estima...
Development of a computer program for friction winding system design
Ünal, Fuat Gökhan; Bölükbaşı, Naci; Department of Mining Engineering (2011)
As the trend to deeper mines continues, mine hoists and associated equipment will become more sophisticated, complex, large and expensive. Correct selection of the right type of hoist is imperative. In this vital link between underground and surface, crude estimates of hoist capacity are not good enough, and the mining engineer must design and select the right hoisting system to meet the design specifications and establish the most suitable operating parameters. This study aims to constitute a software mode...
Modelling and control of a wind energy conversion system consisting of a wind turbine and an inverter-fed induction generator.
Sarıbatır, Behçet Melih; Sezer, M. Erol; Department of Electrical and Electronics Engineering (1985)
State estimation techniques for speed sensorless field oriented control of induction motors
Akın, Bilal; Ersak, Aydın; Department of Electrical and Electronics Engineering (2003)
This thesis presents different state estimation techniques for speed sensorlees field oriented control of induction motors. The theoretical basis of each algorithm is explained in detail and its performance is tested with simulations and experiments individually. First, a stochastical nonlinear state estimator, Extended Kalman Filter (EKF) is presented. The motor model designed for EKF application involves rotor speed, dq-axis rotor fluxes and dq-axis stator currents. Thus, using this observer the rotor spe...
Citation Formats
I. Çadırcı, “Steady-state and transient performance analyses of a double output induction generator operating at subsynchronous and supersynchronous speeds,” Ph.D. - Doctoral Program, Middle East Technical University, 1994.