A PC controlled three dimensional machine tool control system

Download

Date

2001

Author

Ateş, Semih Mümin

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/12264

Collections

Suggestions

A PC-based industrial position control system Şen, Kemal; Hizal, Mirzahan; Department of Electrical and Electronics Engineering (2000)
A thyristor dc circuit breaker controlled by a microcomputer Zengince, Halit; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1993)
A remote indicating high voltage electrostatic voltmeter with digital read-out. Tarim, Ahmet Sedat; Department of Electrical Engineering (1981)
A monolithic three-axis micro-g micromachined silicon capacitive accelerometer Chae, J; Külah, Haluk; Najafi, K (Institute of Electrical and Electronics Engineers (IEEE), 2005-04-01) A monolithic three-axis micro-g resolution silicon capacitive accelerometer system utilizing a combined surface and bulk micromachining technology is demonstrated. The accelerometer system consists of three individual single-axis accelerometers fabricated in a single substrate using a common fabrication process. All three devices have 475-mu m-thick silicon proof-mass, large area polysilicon sense/drive electrodes, and small sensing gap (< 1.5 mu m) formed by a sacrificial oxide layer. The fabricated accele...
A microcomputer-microprocessor based dc motor speed controller Ünver, Celal; Kocaoğlan, Erol; Department of Electrical and Electronics Engineering (1996)

Citation Formats

S. M. Ateş, “A PC controlled three dimensional machine tool control system,” Middle East Technical University, 2001.