A PC-based industrial position control system

Download

093309.pdf

Date

2000

Author

Şen, Kemal

Metadata

Show full item record

Item Usage Stats

108
views

0
downloads

URI

https://hdl.handle.net/11511/2682

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A PC controlled three dimensional machine tool control system Ateş, Semih Mümin; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (2001)
A CMOS High Frequency Pulse Width Modulation Integrated Circuit Sahin, Osman Ulas; Kocer, Fatih (2016-08-05) In this work, a high frequency pulse width modulation (PWM) integrated circuit (IC) designed and implemented in a commercial 0.35 mu m CMOS process is presented. Based on natural sampling method, the proposed PWM IC can generate both a PWM signal and its inverse for arbitrary frequencies up to 5 MHz. The PWM frequency can he adjusted via an external clock and an off-chip capacitor. The duty cycle of the PWM signal can be linearly varied from 5% to 95% by changing the input signal. Thanks to its analog trian...
An MC68000-based message handling system Bahçekapılı, Kemal; Aybay, Işık; Department of Electrical and Electronics Engineering (1993)
A monolithic three-axis micro-g micromachined silicon capacitive accelerometer Chae, J; Külah, Haluk; Najafi, K (Institute of Electrical and Electronics Engineers (IEEE), 2005-04-01) A monolithic three-axis micro-g resolution silicon capacitive accelerometer system utilizing a combined surface and bulk micromachining technology is demonstrated. The accelerometer system consists of three individual single-axis accelerometers fabricated in a single substrate using a common fabrication process. All three devices have 475-mu m-thick silicon proof-mass, large area polysilicon sense/drive electrodes, and small sensing gap (< 1.5 mu m) formed by a sacrificial oxide layer. The fabricated accele...
A Telephone line interface circuit for personal computers and a voice mail application Durucan, Taner; Bulut, M. Mete; Department of Electrical and Electronics Engineering (1997)

Citation Formats

K. Şen, “A PC-based industrial position control system,” Middle East Technical University, 2000.