A phase shifter using RF mems technology.

Download
2002
Sağkol, Hüseyin

Suggestions

A high power current pulser employing crowbarring technique.
Dörtok, Osman; Department of Electrical Engineering (1971)
A single channel pulse height analyser using tunnel diodes.
Ökten, Muammer; Department of Electrical Engineering (1972)
A current source converter based statcom for reactive power compensation at low voltage
Biçer, Nazan; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2010)
This research work is devoted to the analysis, design and development of the Current-Source Converter (CSC) based distribution-type Static Synchronous Compensator (D-STATCOM) for low-voltage applications in reactive-power control in order to achieve i) faster transient response in reactive-power control, ii) lower current harmonic distortion, iii) lower power losses and iv) minimum storage elements in comparison with conventional solutions. The developed CSC-D-STATCOM includes a low-pass input filter and a ...
A digital frequency and rate of frequency relay for load shedding.
Egeli, İ Umut; Department of Electrical and Electronics Engineering (1989)
A vibration-based electromagnetic energy harvester system with highly efficient interface electronics
Rahimi, Arian; Zorlu, Özge; Muhtaroǧlu, Ali; Külah, Haluk (2011-09-01)
This paper presents a vibration-based electromagnetic (EM) energy harvester system utilizing novel and highly efficient interface electronics. The energy harvesting module up-converts the environmental low frequency vibrations for increased AC power output. The interface circuit employs a boot-strap technique to reduce the threshold voltage of the rectifiers further increasing the power conversion efficiency of the overall system. The complete system, composed of an energy harvester module, and a compact 0....
Citation Formats
H. Sağkol, “A phase shifter using RF mems technology.,” Middle East Technical University, 2002.