Characterization of TiO2 thin films prepared by sol-gel processing.

Download
119194.pdf
2002
Kaya, Özlem
Show full item record
49
views
0
downloads
https://hdl.handle.net/11511/12619
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Characterization of TiO2 thin films prepared by sol-gel processing
Özenbaş, Ahmet Macit (2004-01-01)
In this work, TiO2 thin films were prepared by using sol-gel processing on soda-lime glass and silicon substrates. Precursor solutions for TiO2 films were prepared by using the proper amounts of titaniumtetraisopropoxide, diethanolamine and ethanol. The thickness of the TiO2 films was adjusted by repeating the spin coating cycle before the final heat treatment. Finally, various amounts of polyethylene glycol (PEG) were added to the above solution to observe its effect on the film morphology. The electrical ...
Characterization of TiO2 thin films prepared by sol-gel processing
Özenbaş, Ahmet Macit (2004-01-01)
In this work, TiO2 thin films were prepared by using sol-gel processing on soda-lime glass and silicon substrates. Precursor solutions for TiO2 films were prepared by using the proper amounts of titaniumtetraisopropoxide, diethanolamine and ethanol. The thickness of the TiO2 films was adjusted by repeating the spin coating cycle before the final heat treatment. Finally, various amounts of polyethylene glycol (PEG) were added to the above solution to observe its effect on the film morphology. The electrical ...
Characterization of rapidly solidified Al-Fe-V-Si alloy powders
Aral, Burç; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2001)
Characterization of different base binary oil mixtures.
Kayam, Çetin; Department of Chemical Engineering (1976)
Characterization of maghemite thin films prepared by sol-gel processing
Karakuşçu, Aylin; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2006)
In this study, maghemite (γ-Fe2O3) thin films were prepared by chemical solution deposition on glass and quartz substrates. The solution was prepared by using 0.3 M iron (III) nitrate [Fe(NO3)3 - 9H2O] as precursor and dissolved in a mixture of 2-methoxyethanol and acetylacetone in a molar ratio of 20:2, by stirring the solution at RT for 2 hours. Substrates were prepared by either piranha etching method or ultrasonic cleaning method. The solution was spin coated on glass and quartz substrates at 1400 and 4...
Citation Formats
Ö. Kaya, “Characterization of TiO2 thin films prepared by sol-gel processing.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr