Multivariable model predictive controller design for an industrial distillation column.

Download
119171.pdf
2002
Dokucu, Mustafa Tekin
Show full item record
140
views
0
downloads
https://hdl.handle.net/11511/12686
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Multiscale analysis of solids flux signals measured in a high density circulating fluidized bed using wavelet transformation
Külah, Görkem (2005-05-13)
In order characterize the annulus thickness in a high density circulating fluidized bed, local instantaneous solids fluxes are measured using a three-fibre optical probe in a 0.20 m diameter, 5.9 m tall CFB riser operating at superficial gas velocity of 6 m/s and solids circulation flux of 330 kg/m(2)s, with FCC particles of mean diameter 70 mu m and density 1700 kg/m(3) as the bed material. Measurements obtained at three axial levels (z = 0.76, 1.27, 3.10 m) and six radial locations (r/R = 0.94, 0.88, 0.75...
Multicomponent batch distillation column simulation and state observer design.
Yıldız, Ugur; Özgen, Canan; Department of Chemical Engineering (2002)
Multiresolution analysis of S&P500 time series
KILIC, Deniz Kenan; Uğur, Ömür (2018-01-01)
Time series analysis is an essential research area for those who are dealing with scientific and engineering problems. The main objective, in general, is to understand the underlying characteristics of selected time series by using the time as well as the frequency domain analysis. Then one can make a prediction for desired system to forecast ahead from the past observations. Time series modeling, frequency domain and some other descriptive statistical data analyses are the primary subjects of this study: i...
Multiresolution analysis of S&P500 time series
Kılıç, Deniz Kenan; Uğur, Ömür; Department of Financial Mathematics (2015)
Time series analysis is an essential research area for almost all people who are dealing with scientific and engineering problems. Main aim is to understand the underlying characteristics of the time series by using time as well as frequency domain analyses. Then one can make a prediction for the desired system to forecast observations ahead. Time series modeling, frequency domain analysis and some descriptive statistical analysis are main subjects of this thesis. Choosing an appropriate model is the main f...
Multiobjective Optimization of the DC-DC Stage of a Module-Integrated Inverter Based on an Efficiency Usage Model
Mirjafari, Mehran; Balog, Robert S.; Turan, Raşit (Institute of Electrical and Electronics Engineers (IEEE), 2014-05-01)
As photovoltaic (PV) energy continues to gain market penetration due to the lower cost of PV modules, attention is shifting to the balance of system. In this paper, a new efficiency evaluation technique based on a usage model that is synthesized from high-temporal operational data of a PV module is investigated, along with a multiobjective design optimization of the dc-dc stage of a module-integrated inverter. The analysis shows that the technique provides more accurate results than the California Energy Co...
Citation Formats
M. T. Dokucu, “Multivariable model predictive controller design for an industrial distillation column.,” Middle East Technical University, 2002.
METU IIS - Integrated Information Service open@metu.edu.tr