Constant beamwidth ridged horn antenna design and implementation

Download

143471.pdf

Date

2003

Author

Altungüneş, İnanç

Metadata

Show full item record

Item Usage Stats

155
views

0
downloads

URI

https://hdl.handle.net/11511/13087

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Steady state starting performance of large brushless salient synchronous machines. Özgen, Cengiz M S; Department of Electrical Engineering (1973)
Steady state characteristics of polarised-mho and directional relays with application to series compensated lines. Abusharkh, M. Fawzi; Türeli, Ayhan; Department of Electrical and Electronics Engineering (1979)
Real-Time Speed and Position Estimation Using Rotor Slot Harmonics Keysan, Ozan; Ertan, Hulusi Bülent (2013-05-01) It is well known that slotting harmonics exist in most of the electrical machines. So far, these harmonics are mainly identified using spectral estimation techniques. However, this approach requires long sampling and computation periods. In this study, a novel speed and position estimation method based on identification of rotor slot harmonics (RSH) that does not require any kind of spectral analysis is proposed. The required information is extracted by demodulating the information available in an external ...
Fine resolution frequency estimation from three DFT samples: Case of windowed data Candan, Çağatay (2015-09-01) An efficient and low complexity frequency estimation method based on the discrete Fourier transform (DFT) samples is described. The suggested method can operate with an arbitrary window function in the absence or presence of zero-padding. The frequency estimation performance of the suggested method is shown to follow the Cramer-Rao bound closely without any error floor due to estimator bias, even at exceptionally high signal-to-noise-ratio (SNR) values.
Multi-band polarization independent cylindrical metamaterial absorber and sensor application Dincer, Furkan; KARAASLAN, MUHARREM; Colak, Sule; TETİK, ERKAN; AKGÖL, OĞUZHAN; ALTINTAŞ, OLCAY; Sabah, Cumali (World Scientific Pub Co Pte Lt, 2016-03-30) A multi-band perfect metamaterial absorber (MA) based on a cylindrical waveguide with polarization independency is numerically presented and investigated in detail. The proposed absorber has a very simple configuration, and it operates at flexible frequency ranges within the microwave frequency regime by simply tuning the dimensions of the structure. The maximum absorption values are obtained as 99.9%, 97.5%, 85.8%, 68.2% and 40.2% at the frequencies of 1.34 GHz, 2.15 GHz, 3.2 GHz, 4.31 GHz and 5.41 GHz, re...

Citation Formats

İ. Altungüneş, “Constant beamwidth ridged horn antenna design and implementation,” M.S. - Master of Science, Middle East Technical University, 2003.