Thermal stresses in a heat generating linearly hardening cylinder with free ends

Download
143529.pdf
2003
Şener, Emre
Show full item record
92
views
0
downloads
https://hdl.handle.net/11511/13118
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Thermal stresses in a composite circular cylindrical rod of finite length with a preassigned temperature distribution.
Eren, Nabi; Department of Engineering Sciences (1975)
Thermal stresses in elastic-plastic tubes with temperature-dependent mechanical and thermal properties
Orcan, Y; Eraslan, Ahmet Nedim (2001-11-01)
The thermoelastic-plastic deformations of internal heat-generating tubes are investigated by considering the temperature dependence of the thermal conductivity coefficient, Young's modulus, the coefficient of thermal expansion, and the yield limit of the material. A model describing the elastic-plastic behavior of the tube is developed. The model consists of a system of two second-order ordinary differential equations and a first-order ordinary differential equation involving nonlinear temperature-dependent...
Thermal behaviour of single core cables in air.
Çorakçı, H. Şükrü; Department of Electrical Engineering (1982)
Thermal loading and unloading of a solid cylinder subjected to periodic internal energy cycling
Eraslan, Ahmet Nedim (2017-03-01)
An analytical model is developed to estimate partially plastic loading and unloading behavior of a transient internal energy cycling solid cylinder. The cylinder is initially at zero temperature, but for times greater than zero, heat is generated or consumed internally at a time dependent rate. The transient temperature distribution in the cylinder is obtained by using Duhamel's theorem. As the cylinder is heated or cooled slowly the uncoupled theory of thermal stress is used. Under these circumstances elas...
Thermal analysis of gray cast iron by interpretation of cooling curves
Çetin, Arda; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2002)
The aim of the present work is to investigate the relations between data obtained from the cooling curve and its first and second derivatives and the as-cast microstructure of gray cast iron, assuming that the cooling curve reflects the complete history of the solidification process. Fourteen different alloy compositions are prepared in order to obtain statistical predictive models to relate cooling curve parameters with the solidification variables such as chemical analysis, inoculation, graphite shape, pr...
Citation Formats
E. Şener, “Thermal stresses in a heat generating linearly hardening cylinder with free ends,” M.S. - Master of Science, Middle East Technical University, 2003.
METU IIS - Integrated Information Service open@metu.edu.tr