Design alternatives and failure mechanisms for the world trade center in the concept of tubular form tall building structures

Download
143519.pdf
2003
Dipçin, Cem
Show full item record
79
views
0
downloads
September 11 Terrorist Attacks, 2001, Building failures
https://hdl.handle.net/11511/13520
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Modelling of strengthened hollow brick infills
BARAN, MEHMET; Ozcelik, Ramazan; Sevil, Tugce; Canbay, Erdem (2013-02-01)
Strengthening the existing hollow brick infill walls by bonding high-strength precast concrete panels or applying steel fibre reinforced mortar was found to be an occupant-friendly seismic retrofitting technique for the buildings in use with deficient reinforced concrete structural systems. Both techniques convert the existing non-structural hollow brick infill walls into load-carrying structural members. To verify the effectiveness of the techniques, 20 reinforced concrete frames with hollow brick infill w...
Design of tunable and dual/multi-band metamaterial based perfect microwave absorber
Dincer, Furkan; KARAASLAN, MUHARREM; ÜNAL, EMİN; Sabah, Cumali (2015-01-01)
Tunable and multi-band metamaterial (MTM) based perfect microwave absorber (MA) is designed, implemented, and characterized. Firstly, dual-band MA with has two distinct resonances is investigated both numerically and experimentally which is also tested according the incident angle and polarization independencies. Then, the modified versions of MA are investigated and compared with respect to their absorbance, mechanical tunability, and multi-band characters. As a result, the suggested MAs with perfect absor...
Potential Utilization of Building Information Models for Planning Maintenance Activities
Akçamete Güngör, Aslı; Garrett, James H (2010-06-30)
The opportunities for leveraging Building Information Models (BIMs) for facility operations are compelling and yet utilization of BIMs during building operation and maintenance is falling behind the BIM implementations for design and construction. Current studies of BIMs used for the operations phase and commercially available technologies focus on transferring information from the design and construction phases to the operations phase by enabling creation and capturing of digital facility information throu...
Modeling of Multi Open Phase Fault Condition of Multi-phase Permanent Magnet Synchronous Motors
Fei, Marco; Zanasi, Roberto (2011-09-10)
This paper deals with the modeling of multi-phase permanent magnet synchronous motors under multi open phase fault condition. The presented model is suitable for generic number of phases, generic shape of the rotor flux and generic number of open circuit faults. The motor model in fault condition can be used for faults occurring on both adjacent and not adjacent phases. The model can be very useful both for simulation and implementation of fault-tolerant control strategies.
EXACT NUMERICAL-SOLUTIONS FOR RADIATIVE HEAT-TRANSFER IN CYLINDRICAL FURNACES
Selçuk, Nevin (1988-05-01)
Exact expressions for the distributions of the components of radiative flux density and the radiative energy source term in terms of wall and medium temperature distributions have been formulated for an emitting absorbing medium of constant properties bounded by black walls of a cylindrical enclosure. The accuracy of numerical solutions has been tested on an idealized enclosure for which exact analytical solution of the expressions is possible and shown to have six‐figure accuracy. The exact expressions hav...
Citation Formats
C. Dipçin, “Design alternatives and failure mechanisms for the world trade center in the concept of tubular form tall building structures,” M.S. - Master of Science, Middle East Technical University, 2003.
METU IIS - Integrated Information Service open@metu.edu.tr