Simultaneous hot and cold forging of solid cylinders

Kayatürk, Kürşad


Assessment and improvement of analytical methods to predict backward can extrusion forces
Egemen, Mete; Tekkaya, A. Erman; Department of Mechanical Engineering (2003)
Technological characteristics of abrick masonry structure and their relationship with the structural behaviour /
Aktaş, Yasemin Didem; Türer, Ahmet; Department of Archaeometry (2006)
The aim of this study is to investigate the physical and mechanical properties of construction materials in relation with the structural behaviour of a historic structure. Within this framework, the brick masonry superstructure of Tahir ile Zuhre Mescidi, a XIIIth century Seljuk monument in Konya was selected as case study. The study started with the determination of the basic physical (bulk density, effective porosity, water absorption capacity), mechanical (modulus of elasticity, uniaxial compressive stre...
Optimum design of plates under dynamic conditions
Kılıç, Orkun; Oral, Süha; Department of Mechanical Engineering (2003)
Nonlinear finite element analysis of tunnels
Yıldırım, Musa; Yılmaz, Çetin; Department of Civil Engineering (1994)
Rate effect parameters for oper-ended pipe piles in sand
Oud, Mohamed; Birand, Altay; Department of Civil Engineering (1991)
Citation Formats
K. Kayatürk, “Simultaneous hot and cold forging of solid cylinders,” M.S. - Master of Science, Middle East Technical University, 2003.