Free bending vibrations of partially stiffened, stepped-thickness, two-layer, orthotropic, composite plates and panels

Download
068405.pdf
1997
Özerciyes, Ömer Varlık
Show full item record
66
views
0
downloads
https://hdl.handle.net/11511/1422
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Free bending vibrations of integrally-stiffened and/or stepped-thickness rectangular plates or panels with a non-central plate stiffener
Yuceoglu, U.; GEMALMAYAN, NİHAT; Sunar, O. (2007-11-16)
The present study is primarily concerned with the "Free Bending Vibrations of Integrally-Stiffened and/or Stepped-Thickness Plates or Panels with a Non-Central Plate Stiffener". The general theoretical formulation is based on the "Mindlin Plate Theory". The plate elements of the system are considered to be made of dissimilar orthotropic materials with unequal thicknesses. The transverse shear deformations and the transverse and the rotary moments of inertia of plate elements are included in the analysis. Th...
Free bending vibrations of a centrally bonded symmetric double lap joint (or symmetric double doubler joint) with a gap in mindlin plates or panels
Yuceoglu, U.; Guvendik, O.; Ozerciyes, V. (2007-11-16)
In this present study, the "Free Bending Vibrations of a Centrally Bonded Symmetric Double Lap Joint (or Symmetric Double Doubler Joint) with a Gap in Mindlin Plates or Panels" are theoretically analyzed and are numerically solved in some detail. The "plate adherends" and the upper and lower "doubler plates" of the "Bonded Joint" system are considered as dissimilar, orthotropic "Mindlin Plates" joined through the dissimilar upper and lower very thin adhesive layers. There is a symmetrically and centrally lo...
Free bending vibrations of adhesively bonded orthotropic plates
Toghi, Farid; Yüceoğlu, Umur; Tekinalp, Ozan; Department of Aeronautical Engineering (1992)
Free vibration characteristics of a 3d mixed formulation beam element with force-based consistent mass matrix
Soydas, Ozan; Sarıtaş, Afşin (2017-09-01)
In this analytical study, free vibration analyses of a 3d mixed formulation beam element are performed by adopting force-based consistent mass matrix that incorporates shear and rotary inertia effects. The force-based approach takes into account the actual distribution of mass of an element in the derivation of the mass matrix. Moreover, the force-based approach enables accurate determination of free vibration frequencies of members with varying geometry and material distribution without any need for specif...
FREE VIBRATION ANALYSIS OF UNIFORM AND ASYMMETRIC COMPOSITE PRETWISTED ROTATING THIN WALLED BEAM
Farsadi, Touraj; Şener, Özgün; Kayran, Altan (2017-11-09)
Composite pretwisted rotating thin walled beams (TWB) can be used as the structural model for composite helicopter and wind turbine blades for the study of aeroelastic response of the blades. In the present study, semi-analytical solution is performed for the free vibration analysis of uniform and asymmetric composite pretwisted rotating TWB. The approximation of the Green-Lagrange strain tensor is adopted to derive the strain field of the system. The Euler Lagrange governing equations of the dynamic system...
Citation Formats
Ö. V. Özerciyes, “Free bending vibrations of partially stiffened, stepped-thickness, two-layer, orthotropic, composite plates and panels,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr