Liquid phase hydrodesulpherization of fuel oils /

1973
Gültekingil, Murat

Suggestions

Liquid phase sintering of tungsten-nickel-cobalt heavy alloys
Dinçer, Onur; Kalkanlı, Ali; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2014)
The aim of this thesis study was to investigate the effects of composition and sintering variables on the microstructural characteristics of W-rich W-Ni-Co heavy alloys. W-Ni-Co alloys containing 90 to 97 wt% W and different Ni/Co ratios were investigated in the study. The alloys studied were produced by applying conventional powder metallurgy methods and subjected to microstructural and mechanical characterization by using suitable techniques. All of the alloys investigated reached almost full density when...
Liquid Phase Sintering Behaviour of Tungsten Powders Produced by the Electrochemical Reduction
Erol, Mahmut; Erdoğan, Metehan; Karakaya, İshak (2016-11-01)
Liquid Phase Epitaxy of Sputtered Germanium on Silicon Substrate for Germanium-on-Insulator (GOI) Applications
Ayan, Arman; Özcan, Can; Yerci, Selçuk (null; 2018-06-22)
Liquid - liquid heat transfer in turbulent flow /
Kaymakçalan, Ömer; Department of Chemical Engineering (1969)
Gas Phase Temperature Mapping of Evaporating Water Microdroplets
Mousa, Mohamed; Günay, Ahmet Alperen; Orejon, Daniel; Miljkovic, Nenad (2019-11-14)
Citation Formats
M. Gültekingil, “Liquid phase hydrodesulpherization of fuel oils /,” Middle East Technical University, 1973.