Liquid - liquid heat transfer in turbulent flow /

Kaymakçalan, Ömer


Liquid Phase Sintering Behaviour of Tungsten Powders Produced by the Electrochemical Reduction
Erol, Mahmut; Erdoğan, Metehan; Karakaya, İshak (2016-11-01)
Liquid phase sintering of tungsten-nickel-cobalt heavy alloys
Dinçer, Onur; Kalkanlı, Ali; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2014)
The aim of this thesis study was to investigate the effects of composition and sintering variables on the microstructural characteristics of W-rich W-Ni-Co heavy alloys. W-Ni-Co alloys containing 90 to 97 wt% W and different Ni/Co ratios were investigated in the study. The alloys studied were produced by applying conventional powder metallurgy methods and subjected to microstructural and mechanical characterization by using suitable techniques. All of the alloys investigated reached almost full density when...
Liquid phase hydrodesulpherization of fuel oils /
Gültekingil, Murat; Department of Chemical Engineering (1973)
Liquid-(Solid plus Liquid) Transitions in a Two-Component System of (CH3)CCl3 + CCl4
Yurtseven, Hasan Hamit (2020-02-01)
Liquid-(solid + liquid) transitions are studied in (CH3)CCl3 + CCl4 by using the Landau phenomelogical model. The Gibbs energy is expanded in terms of the orientational disorder (OD) parameters for the transitions of the liquid-(rhombohedral + liquid) and liquid-(face-centered cubic + liquid) in a two component system of (CH3)CCl3 + CCl4. From the Gibbs energy, the phase line equations are derived for the transitions studied and they are fitted to the observed T-X phase diagram of (CH3)CCl3 + CCl4 for the c...
Liquid-liquid equilibrium studies for hydrocarbon-alcohol-water systems
Abdulghani, Bassam; Yılmaz, Levent; Department of Chemical Engineering (1991)
Citation Formats
Ö. Kaymakçalan, “Liquid - liquid heat transfer in turbulent flow /,” Middle East Technical University, 1969.