Gas Phase Temperature Mapping of Evaporating Water Microdroplets

Date

2019-11-14

Author

Mousa, Mohamed
Günay, Ahmet Alperen
Orejon, Daniel
Miljkovic, Nenad

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

75
views

0
downloads

URI

https://hdl.handle.net/11511/92855

Conference Name

International Mechanical Engineering Congress & Exposition, IMECE2019

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Gas-Phase Temperature Mapping of Evaporating Microdroplets Mousa, Mohamed H.; Günay, Ahmet Alperen; Orejon, Daniel; Khodakarami, Siavash; Nawaz, Kashif; Miljkovic, Nenad (2021-04-01) Evaporation is a ubiquitous and complex phenomenon of importance to many natural and industrial systems. Evaporation occurs when molecules near the free interface overcome intermolecular attractions with the bulk liquid. As molecules escape the liquid phase, heat is removed, causing evaporative cooling. The influence of evaporative cooling on inducing a temperature difference with the surrounding atmosphere as well as within the liquid is poorly understood. Here, we develop a technique to overcome past diff...
Gas phase reaction kinetics in boron fibre production Firat, Fatih; Sezgi, Naime Aslı; Ozbelge, Hilmi O.; Doğu, Timur (2012-05-01) In the production of boron fibres using the chemical vapor deposition (CVD) technique, boron deposition and dichloroborane formation reactions occurs simultaneously. Boron deposition reaction occurs at the surface, whereas the formation of dichloroborane is the result of both gas phase and surface reactions. A continuous stirred tank reactor (CSTR) type of reactor was designed to investigate the reaction kinetics and kinetic parameters in the gas phase reactions of boron trichloride and hydrogen. It was con...
Gas phase reaction of boron fiber productıon Fırat, Fatih; Özbelge, H. Önder; Department of Chemical Engineering (2004) In the production of boron fibers using CVD technique, boron deposition and dichloroborane formation reactions take place in a reactor. Boron deposition reaction occurs at the surface while formation of dichloroborane is the result of both gas phase and surface reactions. A CSTR type of reactor was designed and constructed from stainless steel to investigate the gas phase reaction kinetics and kinetic parameters of boron fibers produced from the reaction of boron trichloride and hydrogen gases in a CVD reac...
Gas source molecular beam epitaxy growth and characterization of Ga0.51In0.49P/InxGa1-xAs/GaAs modulation-doped field-effect transistor structures Beşikci, Cengiz; Ozder, S; Sen, O; Jelen, C; Slivken, S; Razeghi, M (IOP Publishing, 1997-11-01) Lattice-matched Ga0.51In0.49P/GaAs and strained Ga0.51In0.49P/InxGa1-xAs/GaAs (0.1 less than or equal to x less than or equal to 0.25) modulation-doped field-effect transistor structures were grown by gas source molecular beam epitaxy by using Si as dopant. Detailed electrical characterization results are presented, The Ga0.5In0.49P/In0.25Ga0.75As/GaAs sample yielded dark two-dimensional electron gas densities of 3.75 x 10(12) cm(-2) (300 K) and 2.3 x 10(12) cm(-2) (77 K) which are comparable to the highest...
Gas velocity distribution in conical spouted beds with high-density particles Doğan, Neslin; KÖKSAL, MURAT; Külah, Görkem (2021-03-01) Local gas velocity measurements were conducted utilizing a Pitot tube in two small-scale (D-c = 150 mm, gamma = 30 degrees, 60 degrees) and one large-scale (D-c = 250 mm, gamma = 66 degrees) conical spouted beds. Three different types of particles, zirconia (rho(p) = 6050 kg/m(3)), zirconia-toughened alumina (rho(p) = 3700 kg/m(3)), and glass beads (rho(p) = 2460 kg/m(3)), were used in the experiments. Careful calibration of the Pitot tube for determination of gas velocities in the annulus section was carri...

Citation Formats

M. Mousa, A. A. Günay, D. Orejon, and N. Miljkovic, “Gas Phase Temperature Mapping of Evaporating Water Microdroplets,” presented at the International Mechanical Engineering Congress & Exposition, IMECE2019, Salt Lake City, UT, Amerika Birleşik Devletleri, 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92855.