Effects of bar cutoff on flexural behavior of reinforced concrete beams

Acar, Fikri


Effects of bar cut off on shear behavior of reinforced concrete beams
Kazanç, Hakan; Tankut, Tuğrul; Department of Civil Engineering (1998)
Effects of cast-in-place concrete topping on flexural response of precast concrete hollow-core slabs
Baran, Eray (2015-09-01)
Results of a study focusing on the flexural response of precast prestressed concrete hollow-core slabs with cast-in-place concrete topping are presented. The experimental part of the study included load testing of five precast concrete hollow-core units. The numerically determined flexural response of test specimens was later compared with the experimentally obtained behavior. Results demonstrate that a major composite action is valid between the hollow-core unit and the topping slab under load levels corre...
Effects of injection pressure and post-curing on the behavior of woven carbon fiber/epoxy composites produced by rtm (resin transfer molding)
Kaş, Yusuf Onur; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (2002)
RTM (Resin Transfer Molding) is a closed mold process in which matrix resin is injected into a mold filled with a fiber preform. There are many RTM process parameters influencing the quality of the final product. The objective of this work was to study two of these variables: resin injection pressure and post-curing conditions. For this purpose, an amine curing epoxy resin was injected, by using a small laboratory size RTM machine, into a flat mold filled with woven carbon fiber layers. Various combinations...
Effects of soil-structure interaction and base isolation on seismic performance of foundation soils
Soyoz, Serdar; Çetin, Kemal Önder; Sucuoğlu, Haluk (2007-06-28)
Effects of roughness on hydraulic jump properties
Birol, Bulent; Göğüş, Mustafa; Department of Civil Engineering (1989)
Citation Formats
F. Acar, “Effects of bar cutoff on flexural behavior of reinforced concrete beams,” Middle East Technical University, 1997.