Design and implementation of a high power, high frequency switch mode battery charger

Download
068449.pdf
1997
Pakfiliz, Ahmet Güngör
Show full item record
231
views
0
downloads
https://hdl.handle.net/11511/1521
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design, analysis and implementation of a 50 w wireless charger of a charging vest battery
Eren, Merih; Bostancı, Emine; Department of Electrical and Electronics Engineering (2019)
Wireless power transfer (WPT) has been a very popular research topic for a variety of applications with power ratings ranging from few watts to several kilowatts. High power levels are mostly used in electric vehicle charging applications whereas lower power level applications are mostly in household appliances, wearable devices and medical implants. Topology, geometries of the transferring and receiving coils and their relative positions are fundamental parts that affect performance of WPT systems. In WPT ...
Design and implementation of 200 joule/second capacitor charging power supply and flashtube driving system
Erentürk, Birol; Çadırcı, Işık; Department of Electrical and Electronics Engineering (1995)
Design and implementation of a sic based three phase grid-connected current source inverter for solar applications
Bay, Olcay; Ermiş, Muammer; Bilgin, Hazım Faruk; Department of Electrical and Electronics Engineering (2017)
In this thesis, analysis, design and implementation of a three-phase 400V, 20 kVA Current Source Inverter (CSI) have been carried out for grid-connected photovoltaic applications based on the multi-string inverter concept. This inverter can be used in large scale photovoltaic (PV) applications by connecting many in parallel at 400V and coupling to medium voltage through a common transformer. The power stage of the inverter is based on the basic full-bridge CSC topology and each power semiconductor which mus...
Design and implementation of a voltage source converter based hybrid active power filter
Uçak, Onur; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2009)
This research work is devoted to the analysis, design and implementation of a shunt connected Hybrid Active Power Filter by the use of a lower rated voltage source PWM converter, and a series connected LC passive filter. In recent years, voltage and current harmonics have become a serious problem both in transmission and distribution systems, due to the widespread usage of non-linear loads such as diode/thyristor rectifiers, electric arc furnaces and motor drives. In order to obtain a better performance tha...
Design and implementation of a voltage source converter based statcom for reactive power compensation and harmonic filtering
Çetin, Alper; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2007)
In this thesis, design and implementation of a distribution-type, voltage source converter (VSC) based static synchronous compensator (D-STATCOM) having the simplest converter and coupling transformer topologies have been carried out. The VSC STATCOM is composed of a +/- 750 kVAr full-bridge VSC employing selective harmonic elimination technique, a low-pass input filter, and a /Y connected coupling transformer for connection to medium voltage bus. The power stage of VSC based STATCOM is composed of water-co...
Citation Formats
A. G. Pakfiliz, “Design and implementation of a high power, high frequency switch mode battery charger,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr