Design and implementation of 200 joule/second capacitor charging power supply and flashtube driving system

Download
047303.pdf
1995
Erentürk, Birol
Show full item record
84
views
0
downloads
https://hdl.handle.net/11511/11028
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and implementation of a high power, high frequency switch mode battery charger
Pakfiliz, Ahmet Güngör; Çadırcı, Işık; Department of Electrical and Electronics Engineering (1997)
Design and implementation of low phase noise phase locked loop based local oscillator
Bölücek, Muhsin Alperen; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2009)
In this thesis, a low phase noise local oscillator operating at 2210 MHz is designed and implemented to be used in X-Band transmitter of a LEO satellite. Designed local oscillator is a PLL (Phase Locked Loop) based frequency synthesizer which is implemented using discrete commercial components including ultra low noise voltage controlled oscillator and high resolution, low noise fractional-N synthesizer. Operational settings of the synthesizer are done using three wire serial interface of a microcontroller....
Design and implementation of a 200w microinverter for grid connected photovoltaic energy conversion system
Kavurucu, Semih; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2014)
As one type of the grid-connected photovoltaic energy conversion systems, micro-inverters (MI, also known as Module Integrated Inverters, MII) are typically designed for residential applications with energy capacities of 3-5 kW and less, in order to provide PV module level energy generation, plug-N-play operation, minimization of the shading effects occurring on the PV module, and flexibility of installation. For the micro-inverter system which can be designed employing variety of topologies, interleaving f...
Design and development of fiber optic MEMS microphone measurement system
Karaca, Ekin Muharrem; Bayram, Barış; Department of Electrical and Electronics Engineering (2019)
In this thesis, fiber optic MEMS microphone measurement system is designed and demonstrated. The displacement of the sensing element of the fiber optic microphone, the membrane, together with the optical components are 3-D modeled and simulated by means of finite element methods. The parameters of the optical system under different measurement conditions are optimized according to the simulation results. Based on the simulation results, the measurement system setup is designed, constructed and functionalize...
Design and experimental investigation of microchannel heat exchanger
Çetin, Murat; Güvenç Yazıcıoğlu, Almıla; Department of Mechanical Engineering (2010)
Due to the high performance of electronic components, the heat generation is increasing dramatically. Heat dissipation becomes a significant issue in efficiency promotion and stable operation. Microchannels are of current interest for use in heat exchangers where very high heat transfer performance is desired. Microchannels provide high heat transfer coefficients because of their small hydraulic diameters. In this study, the design and experimental investigation of fluid flow and heat transfer in a microcha...
Citation Formats
B. Erentürk, “Design and implementation of 200 joule/second capacitor charging power supply and flashtube driving system,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr