A study on heat transfer inside the wellbore during drilling operations

Download
index.pdf
2006
Apak, Esat Can
Show full item record
169
views
61
downloads
Analysis of the drilling fluid temperature in a circulating well is the main objective of this study. Initially, an analytical temperature distribution model, which utilizes basic energy conservation principle, is presented for this purpose. A computer program is written in order to easily implement this model to different cases. Variables that have significant effect on temperature profile are observed. Since the verification of the analytical model is not probable for many cases, a computer program (ANSYS) that uses finite element method is employed to simulate different well conditions. Three different wells were modeled by using rectangular FLOTRAN CFD element that has four nodes. Maximum drilling fluid temperature data corresponding to significant variables is collectedfrom these models. This data is then used to develop an empirical correlation in order to determine maximum drilling fluid temperature. The proposed empirical correlation can estimate the temperature distribution within the wellbore with an average error of less than 16%, and maximum drilling fluid temperature with an average error of less than 7 %.
Engineering Design.
http://etd.lib.metu.edu.tr/upload/12608048/index.pdf
https://hdl.handle.net/11511/16221
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Heat Distribution within the Wellbore While Drilling
Apak, E. C.; Ozbayoglu, E. M. (Informa UK Limited, 2009-01-01)
Analysis of the drilling fluid temperature in a circulating well is the main objective of this study. Initially, different analytical temperature distribution models were studied. Variables that have significant effect on temperature profile are observed. Since the verification of the analytical model is not probable for many cases, a computer program that uses a finite element method is employed to simulate different well conditions. Three different wells are modeled by using rectangular elements with four...
Extra Korolev producers: their impact on production
Yskak, Aidos; Parlaktuna, Mahmut; Department of Petroleum and Natural Gas Engineering (2010)
In this study, a three-dimensional, three-phase dynamic simulation model based on geological investigations of Korolev oilfield in Kazakhstan was used as a development planning tool in order to improve performance of three new wells. The model, developed previously by means of a seismic study, well log and core data, incorporating with characteristics of oilfield productivity, properties of reservoir, liquids and gases that are saturating the hydrocarbon-bearing horizon can be used to calculate development ...
Development of helical tubular reactor for hydrogen producing photosynthetic bacteria
Sarı, Süleyman; Eroğlu, İnci; Department of Biotechnology (2007)
Photobiological hydrogen production from organic materials occurs with the help of illumination and under aerobic conditions within photobioreactors. Novel designs are needed in order to increase the light conversion efficiency and to improve the biological hydrogen production. In this thesis, purple non sulfur bacteria Rhodobacter sphaeroides O.U. 001 was employed as the hydrogen producing microorganism. Two different types of photobioreactors, namely oscillatory helical photobioreactor and recycling helic...
Evaluation and modeling of streamflow data: entropy method, autoregressive models with asymmetric innovations and artifical neural networks
Şarlak, Nermin; Şorman, Ali Ünal; Department of Civil Engineering (2005)
In the first part of this study, two entropy methods under different distribution assumptions are examined on a network of stream gauging stations located in Kizilirmak Basin to rank the stations according to their level of importance. The stations are ranked by using two different entropy methods under different distributions. Thus, showing the effect of the distribution type on both entropy methods is aimed. In the second part of this study, autoregressive models with asymmetric innovations and an artific...
Determination of hydrate formation conditions of drilling fluids
Kupeyeva, Aliya; Parlaktuna, Mahmut; Department of Petroleum and Natural Gas Engineering (2007)
The objective of this study is to determine hydrate formation conditions of a multicomponent polymer based drilling fluid. During the study, experimental work is carried out by using a system that contains a high-pressure hydrate formation cell and pressure-temperature data is recorded in each experiment. Different concentrations of four components of drilling fluid, namely potassium chloride (KCl), partially hydrolyzed polyacrylicamide (PHPA), xanthan gum (XCD) and polyalkylene glycol (poly.glycol) were us...
Citation Formats
E. C. Apak, “A study on heat transfer inside the wellbore during drilling operations,” M.S. - Master of Science, Middle East Technical University, 2006.
METU IIS - Integrated Information Service open@metu.edu.tr