Nano structural metal composites : synthesis, structural and thermal characterization

Download
2008
Kaleli, Kadir
In this work , metal functional polymers, namely Cr-PS-b-P2VP, Co-PS-b-P2VP, Au-PS-b-P2VP, Fe-PS-b-P2VP and Mo-PS-b-P2VP were prepared by thermal reaction of hexacarbonylchromium, Cr(CO)6, octacarbonyldicobalt,Co2(CO)8, hydrogentetrachloroaurate(III), H(AuCl4).4H2O, trichloroiron(III), FeCl3.6H2O, molybdenum(VI)oxide, MoO3 and PS-b-P2VP. TEM images indicated formation of AuIII, Cr and Co nanoparticles. On the other hand, crystalline structures were detected for Fe-PS-b-P2VP and Mo-PS-b-P2VP. Samples involving nanoparticles were further characterized by FTIR, UV-Vis and direct pyrolysis mass spectroscopy techniques. FTIR analysis indicated dissapearance of characteristic carbonyl peaks of Cr(CO)6 and Co2(CO)8 for Cr-PS-b-P2VP and Co-PS-b-P2VP samples. The appearance of a peak at about 467 cm-1 supported the formation of metal-nitrogen bond. Pyrolysis mass spectrometry analysis showed an increase in the thermal stability of P2VP chains involving coordinated pyridine units. The thermal stability of these chains increased in the order Co< Cr.

Suggestions

Preparation and characterization of magnetic nanoparticles
Küçük, Burcu; Volkan, Mürvet; Department of Chemistry (2009)
Magnetite (Fe3O4) and Maghemite (γ-Fe2O3) are well-known iron oxide phases among magnetic nanoparticles due to their magnetic properties, chemical stability, and nontoxicity. They have gained acceptance in several fields of application of nanomaterials such as magnetic recording systems, magnetic refrigeration, magneto-optical devices, magnetic resonance imaging, magnetic separation techniques and separation and purification of biological molecules. Recently, there is a growing interest in the synthesis of ...
Voltammetric methods of reboxetine analysis and the mechanism of its electrode reactions
Altunöz Erdoğan, Deniz; Erk, Nevin; Kilic, Esma (Walter de Gruyter GmbH, 2013-05-01)
Reboxetine (RBX) electrochemical redox behavior at hanging mercury drop (HMDE) and glassy carbon electrodes (GCE) was studied in various pH Britton-Robinson universal buffers using cyclic voltammetry and square-wave voltammetry. RBX was reduced at the HMDE and oxidized at the GCE with reversible adsorption controlled and irreversible diffusion controlled processes respectively. The anodic peak is due to the amine and the cathodic peak may correspond to oxygen protonation. An oxidation reaction mechanism is ...
Preparation and characterization of carbon supported platinum nanocatalysts with different surfactants for C1 to C3 alcohol oxidations
Ertan, Salih; Gökağaç Arslan, Gülsün; Department of Chemistry (2011)
In this thesis, carbon supported platinum nanoparticles have been prepared by using PtCl4 as a starting material and 1-octanethiol, 1-decanethiol, 1-dodecanethiol and 1-hexadecanethiol as surfactants for methanol, ethanol and 2-propanol oxidation reactions. The structure, particle sizes and surface morphologies of the platinum were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). XRD and TEM results indicate that all prepared catalysts have ...
Coke Minimization in Dry Reforming of Methane by Ni Based Mesoporous Alumina Catalysts Synthesized Following Different Routes: Effects of W and Mg
ARBAĞ, HÜSEYİN; YAŞYERLİ, SENA; YAŞYERLİ, NAİL; Doğu, Timur; DOĞU, GÜLŞEN (Springer Science and Business Media LLC, 2013-12-01)
Ni based mesoporous alumina (MA) catalysts were synthesized by sol-gel (SGA) and hydrothermal (MA) methods, following impregnation and one-pot synthesis routes and catalytic performances of these materials were tested in dry reforming of methane. Results proved the importance of synthesis procedure of the MA supports on the activity and coke resistance of the synthesized materials, containing 16 % Ni. Among these catalysts, MA prepared by the sol-gel technique (Ni@SGA) showed the highest activity in dry ref...
Thermal catalytic hydrosilylation of conjugated dienes with triethylsilane in the presence of tricarbonyl(o-xylene)metal (metal = Cr, Mo, W) complexes
Kayran, C; Rouzi, P (Walter de Gruyter GmbH, 2001-11-01)
The thermal catalytic hydrosilylation of 1,3-butadiene (1), trans-2-methyl-1, 3-pentadiene (2), 2,3-dimethyl-1,3-butadiene (3), and isoprene (4), with triethylsilane were studied in the presence of M(CO)(3) (o-xylene) (M = Cr, Mo, W) complexes in polar and nonpolar solvents such as tetrahydrofuran, hexane and toluene. Mo(CO)(3) (o-xylene) was found to be the only active catalyst for the hydrosilylation of 3 with triethylsilane, which gave 1-triethylsilyl-2,3-dimethyl-2-butene (3a), as hydrosilylated product...
Citation Formats
K. Kaleli, “Nano structural metal composites : synthesis, structural and thermal characterization,” M.S. - Master of Science, Middle East Technical University, 2008.