Isochronal hydrogenation of textured magnesium/palladium thin films

Download
index.pdf
2009
Özgit, Çağla
Show full item record
156
views
80
downloads
Pure and palladium‐covered 350 nm thick magnesium thin films were deposited on glass substrates via thermal evaporation. In the as‐deposited state, films were highly textured with Mg (001) parallel to the substrate. Hydrogen loading experiments were carried out in two different conditions; namely isothermal and isochronal. Hydrogenation behaviors of the thin films were followed by twopoint probe electrical resistance and optical transmittance measurements, as well as x‐ray diffraction studies. Isothermal hydrogenation experiments conducted on Pd‐covered Mg thin films have revealed that these films can absorb hydrogen at temperatures starting from 333 K, producing MgH2 with a random texture. When the films were heated slowly starting from the room temperature, on the other hand, hydrogenation gives rise to a textured MgH2, where (110) parallel to the substrate with a minor (101) component. Formation of the textured hydride in isochronal loading was discussed within the context of lattice mismatch in Mg to MgH2 transformation. It was further shown that formation of such a textured hydride in Mg thin films minimizes in‐plane lattice distortion.
Metallurgical and materials engineering.
http://etd.lib.metu.edu.tr/upload/12610385/index.pdf
https://hdl.handle.net/11511/18452
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Microwave sintering and characterization of alumina and alumina matrix ceramic nanocomposites
Kayıplar, Burcu; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2010)
Efficiency of microwave heating on the sintering of ceramic materials has been investigated in comparison to conventional processing. Monolithic alumina with or without sintering additives such as MgO, CaO, Y2O3 were fabricated by both conventional and microwave sintering at temperatures ranging from 1000°C to 1600°C with a constant soaking time of 1 hour. Based on the densification results on monolithic alumina, nanometer-sized SiC or stabilized ZrO2 particle-dispersed alumina matrix ceramic nanocomposites...
Combinatorial study of hydrogen storage alloys
Ölmez, Rabia; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2009)
A combinatorial study was carried out for hydrogen storage alloys which involve processes similar to those normally used in their fabrication. The study utilized a single sample of combined elemental (or compound) powders which were milled and consolidated into a bulk form and subsequently deformed to heavy strains. Material library was obtained in a post annealing treatment carried out at elevated temperatures which brings about solid state reactions between the powders yielding equilibrium phases in the r...
Nano-scale phase separation and glass forming ability of iron-boron based metallic glasses
Aykol, Muratahan; Akdeniz, Mahmut Vedat; Department of Metallurgical and Materials Engineering (2008)
This study is pertinent to setting a connection between glass forming ability (GFA) and topology of Fe-B based metallic glasses by combining intimate investigations on spatial atomic arrangements conducted via solid computer simulations with experimentations on high GFA bulk metallic glasses. In order to construct a theoretical framework, the nano-scale phase separation encountered in metallic glasses is investigated for amorphous Fe80B20 and Fe83B17 alloys via Monte Carlo equilibration and reverse Monte Ca...
Isochronal hydrogenation of textured Mg/Pd thin films
Ozgit, Cagla; Akyildiz, Hasan; Öztürk, Tayfur (2010-06-30)
Magnesium thin films of 350 nm, capped with Pd, were deposited on glass substrates and hydrogenated in two different conditions; namely isochronal and isothermal. As-deposited films were highly textured with Mg (001) parallel to the glass substrate. Experiments have shown that under isothermal conditions starting from 333 K, Mg films can absorb hydrogen producing MgH(2) with a random texture. When the films were heated slowly starting from the room temperature, hydrogenation gives rise to a textured MgH2, w...
Experimental investigation of residual stresses introduced via shot peening and their effect on fatigue life of ball bearings
Küçükyılmaz, Ali; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2010)
In this study, residual stresses introduced via application of shot peening on the raceways of bearing rings and their effect on the fatigue life was investigated experimentally. For improvement of residual compressive stress state, shot peening operation with different parameters was utilized. Residual stress measurements were conducted via X-ray diffraction technique. Optimization of residual stress state during the production of ball bearings is the main target of this study. Process parameters for shot ...
Citation Formats
Ç. Özgit, “Isochronal hydrogenation of textured magnesium/palladium thin films,” M.S. - Master of Science, Middle East Technical University, 2009.
METU IIS - Integrated Information Service open@metu.edu.tr