Analysis of conventional low voltage power line communication methods for automatic meter reading and the classification and experimental verification of noise types for low voltage power line communication network

Download

index.pdf

Date

2009

Author

Danışman, Batuhan

Metadata

Show full item record

Item Usage Stats

266
views

487
downloads

In this thesis, the conventional low voltage power line communication methods is investigated in the axis of automated meter reading applications and the classification and experimental verification of common noise types for low voltage power line communication network. The investigated system provides the real time transmission of electricity consumption data recorded by electricity meters, initially to a local computer via a low voltage line through a low speed PLC (Power Line Carrier) environment and subsequently to a corporate network through a high speed data transmission medium. The automated meter system provides a more effective tracking and data acquisition, a more detailed and vigorous knowledge about consumer behavior for subscriber assessment in electricity distribution in association with a brand new management and system supervision concept in electricity distribution control and management technology. The theoretical studies are experimentally verified for the Turkish low voltage power infrastructure through laboratory experiments performed in METU Electrical and Electronics Engineering Department, Electrical Machines and Drives Laboratory and R&D Laboratories of MAKEL facilities in Hadımköy. The single phase voltage of the mains line between the phase and neutral is monitored to exhibit the disturbing effects of various noise sources. The resulting voltage spectrum is logged by using digital data acquisition devices in time and frequency domain. The waveforms are converted to frequency domain using the Fast Fourier Transform (FFT) functions of the MATLAB. The experimental results are compared to the theoretical findings obtained through literature survey.

Subject Keywords

Electrical engineering.

URI

http://etd.lib.metu.edu.tr/upload/12610469/index.pdf
https://hdl.handle.net/11511/18487

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design and realization of broadband instantaneous frequency discriminator Pamuk, Gökhan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2010) n this thesis, RF sections of a multi tier instantaneous frequency measurement (IFM) receiver which can operate in 2 – 18 GHz frequency band is designed, simulated and partially realized. The designed structure uses one coarse tier, three medium tiers and one fine tier for frequency discrimination. A novel reflective phase shifting technique is developed which enables the design of very wideband phase shifters using stepped cascaded transmission lines. Compared to the classical phase shifters using coupled ...
Design and implementation of low phase noise phase locked loop based local oscillator Bölücek, Muhsin Alperen; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2009) In this thesis, a low phase noise local oscillator operating at 2210 MHz is designed and implemented to be used in X-Band transmitter of a LEO satellite. Designed local oscillator is a PLL (Phase Locked Loop) based frequency synthesizer which is implemented using discrete commercial components including ultra low noise voltage controlled oscillator and high resolution, low noise fractional-N synthesizer. Operational settings of the synthesizer are done using three wire serial interface of a microcontroller....
Modelling and noise analysis of closed-loop capacitive sigma-delta mems accelerometer Boğa, Biter; Külah, Haluk; Department of Electrical and Electronics Engineering (2009) This thesis presents a detailed SIMULINK model for a conventional capacitive Σ-Δ accelerometer system consisting of a MEMS accelerometer, closed-loop readout electronics, and signal processing units (e.g. decimation filters). By using this model, it is possible to estimate the performance of the full accelerometer system including individual noise components, operation range, open loop sensitivity, scale factor, etc. The developed model has been verified through test results using a capacitive MEMS accelero...
Analysis and modeling of high power microwave modules Yapıcı, A. Çağrı; Toker, Canan; Department of Electrical and Electronics Engineering (2004) A microwave module supplying up-to 1 Watt output power at 2.4-2.5 GHz frequency band was investigated. First the module was operated at low power levels and the output power was predicted using the small signal S-parameters of the module. A method was developed to obtain its large signal model using Advanced Design System (ADS) simulator̕s nonlinear analyses facilities. Later using the large signal model of the module simulations carried out to obtain larger powers up-to 1 Watt. The implementation of the mo...
Continuation power flow and voltage stability in power systems Keskin, Mehmet B; Ertaş, Arif; Department of Electrical and Electronics Engineering (2007) This thesis investigates an important power system phenomenon, voltage stability, by using continuation power flow method. Voltage collapse scenario is presented which can be a serious result of voltage instability and the parameters that affect voltage collapse are discussed. In analyzing power system voltage stability, continuation power flow method is utilized which consists of successive load flows. This method is applied to a sample test system and Turkish Power System and load-voltage curves for sever...

Citation Formats

B. Danışman, “Analysis of conventional low voltage power line communication methods for automatic meter reading and the classification and experimental verification of noise types for low voltage power line communication network,” M.S. - Master of Science, Middle East Technical University, 2009.