Milimeterwave FMCW radar design

Download

index.pdf

Date

2009

Author

İçöz, Dilşad

Metadata

Show full item record

Item Usage Stats

712
views

178
downloads

In traffic radar system, Frequency Modulated Continuous Wave (FMCW) will be used since these radars are preferred in short distance and high range resolution systems. The system to be constructed is not only a system operating with Doppler principle and detection of speed; on the contrary a functional radar is planned to be produced. In various traffic radars in use, Doppler shift constituted by the targets causing high reflection within detection field is measured and the measured speed corresponding to this shift is seen to exceed the limits. In case of cars more than one, their speeds cannot be measured separately. In this FMCW Radar system, it is possible to identify the targets’ distance and speed. The speed information of the target will be specified by Doppler frequency and also as a result of position monitoring, the speed will be determined out of the position change occurring in the unit time. These features, in multi lane road, will be used both for different lanes and also for the cars moving at the same lane but in different ranges. The radar system designed in this study is an easy to use, low power consuming device which can be mounted into the car. Only the active part of the system is off the shelf products and the other RF cards are designed and produced. As a result, a low cost traffic radar will be produced

Subject Keywords

Electrical engineering.

URI

http://etd.lib.metu.edu.tr/upload/3/12611385/index.pdf
https://hdl.handle.net/11511/19257

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design and implementation of low phase noise phase locked loop based local oscillator Bölücek, Muhsin Alperen; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2009) In this thesis, a low phase noise local oscillator operating at 2210 MHz is designed and implemented to be used in X-Band transmitter of a LEO satellite. Designed local oscillator is a PLL (Phase Locked Loop) based frequency synthesizer which is implemented using discrete commercial components including ultra low noise voltage controlled oscillator and high resolution, low noise fractional-N synthesizer. Operational settings of the synthesizer are done using three wire serial interface of a microcontroller....
Antenna patterns for detecting slowly moving targets in two channel gmti processing Yıldırım, Gökhan; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2010) Ground Moving Target Indicator (GMTI) is a well-known and widely used signal processing method in airborne and spaceborne radars. In airborne radar and GMTI literature, many radar designs and signal processing techniques have been developed to increase the detection and estimation performance under heavy interference conditions. The motion of the aircraft on which the radar is mounted, high altitudes and ranges, targets with low radar cross sections and slowly moving targets complicates the problem of local...
Linear prediction for single snapshot multiple target doppler estimation under possibly moving radar clutter Öztan, Baha Baran; Tanık, Yalçın; Department of Electrical and Electronics Engineering (2008) We have devised a processor for pulsed Doppler radars for multi-target detection in same folded range under land and moving clutter. To this end, we have investigated the estimation of parameters, i.e., frequencies, amplitudes, and phases, of complex exponentials that model target echoes under radar clutter characterized by antenna scanning modulation with observation limited to single snapshot, i.e., one burst. The Maximum Likelihood method of estimation is presented together with the bounds on estimates, ...
Modelling and noise analysis of closed-loop capacitive sigma-delta mems accelerometer Boğa, Biter; Külah, Haluk; Department of Electrical and Electronics Engineering (2009) This thesis presents a detailed SIMULINK model for a conventional capacitive Σ-Δ accelerometer system consisting of a MEMS accelerometer, closed-loop readout electronics, and signal processing units (e.g. decimation filters). By using this model, it is possible to estimate the performance of the full accelerometer system including individual noise components, operation range, open loop sensitivity, scale factor, etc. The developed model has been verified through test results using a capacitive MEMS accelero...
Design and realization of broadband instantaneous frequency discriminator Pamuk, Gökhan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2010) n this thesis, RF sections of a multi tier instantaneous frequency measurement (IFM) receiver which can operate in 2 – 18 GHz frequency band is designed, simulated and partially realized. The designed structure uses one coarse tier, three medium tiers and one fine tier for frequency discrimination. A novel reflective phase shifting technique is developed which enables the design of very wideband phase shifters using stepped cascaded transmission lines. Compared to the classical phase shifters using coupled ...

Citation Formats

D. İçöz, “Milimeterwave FMCW radar design,” M.S. - Master of Science, Middle East Technical University, 2009.