Buildings under recurring near-field earthquakes

Download

index.pdf

Date

2010

Author

Beyhan, Bayhan

Metadata

Show full item record

Item Usage Stats

168
views

96
downloads

Prior to this study, to our best knowledge, no cast-in-place, older-type RC building has ever been subjected to near-field strong ground motions from three major earthquakes. This happened in an indirect way in Turkey over a time span of eleven years. Three identical buildings belonging to Ministry of Public Works and Resettlement (MPWR) that had been built to the same design templates, experienced March 13th 1992 Erzincan earthquake in Erzincan, November 12th 1999 Düzce earthquake in Bolu and May 1st 2003 Bingöl earthquake in Bingöl, respectively. The ground motion sensor stations were fortuitously nearby in an adjacent single-story building in Bolu and Bingöl. The station in Erzincan was in a single-story building about 2 km away from the case study building but we assume that the record applies to the building there. These three data represent characteristics of near-field ground motions and the distance of the sensor stations to the nearest fault trace was less than 10 km. The buildings sustained varying degrees of damage during the earthquakes and their damage survey was employed through site investigations. Given that the damage information, input motions, design drawings and material properties of the buildings are all known, this provided an opportunity to predict the structural damage to these buildings by proper modeling using the tools of current computational performance assessment procedures. In this circumstance, three dimensional (3D) analytical models of the MPWR buildings have been performed. Bi-directional excitations have been applied to the models by nonlinear time history analyses (NTHA). The results illustrate that NTHA are capable of indicating the occurrence of shear failure in captive columns; however, they overestimate the global damage level for all buildings. The overestimation is more significant in Erzincan case where the building sustained a pulse-type motion without significant distress.

Subject Keywords

Buildings, Earthquakes., Earthquake engineering.

URI

http://etd.lib.metu.edu.tr/upload/12612424/index.pdf
https://hdl.handle.net/11511/20023

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

3-D soil structure interaction analyses of three identical buildings in Sakarya city after 17 August 1999 Kocaeli earthquake Ünal, Orhan; Çetin, Kemal Önder; Department of Civil Engineering (2003) The aim of this study is to analyze the soil structure interaction of three identical buildings on ®ahinler Street of Sakarya city which had no damage to heavy damage after the Kocaeli (1999) earthquake. For the purpose of 3-D dynamic nonlinear analysis of the soil site and the overlying structures, Flac3D software was chosen as the numerical modeling framework. Soil properties were determined by using the results of available site investigation studies. A three dimensional mesh was created to represent the...
Ground motion simulations based on regional input parameters and their impact on insurance premiums: Bursa case Ünal, Barış; Askan Gündoğan, Ayşegül; Kestel, Sevtap Ayşe; Department of Earthquake Studies (2015) Determination of earthquake parameters are required for earthquake resistant design and retrofitting of exsisting structures. There are not many options to obtain earthquake data for regions with no or sparce earthquake recordings. Even though some methods are aplicable to these regions they generate only peak ground motion parameters. For cases that require the full ground motion simulations are necessary. Simulations can also be used for gaining knowledge about source, path and site effects. In this study...
Probabilistic seismic hazard assessment for earthquake induced landslides Balal, Onur; Gülerce, Zeynep; Department of Civil Engineering (2013) Earthquake-induced slope instability is one of the major sources of earthquake hazards in near fault regions. Simplified tools, such as Newmark’s Sliding Block (NSB) Analysis are widely used to represent the stability of a slope under earthquake shaking. The outcome of this analogy is the slope displacement where larger displacement values indicate higher seismic slope instability risk. Recent studies in the literature propose empirical models between the slope displacement and single or multiple ground mot...
Probabilistic seismic hazard assessment of Eastern Marmara and evaluation of Turkish Earthquake Code requirements Ocak, Recai Soner; Gülerce, Zeynep; Department of Civil Engineering (2011) The primary objective of this study is to evaluate the seismic hazard in the Eastern Marmara Region using improved seismic source models and enhanced ground motion prediction models by probabilistic approach. Geometry of the fault zones (length, width, dip angle, segmentation points etc.) is determined by the help of available fault maps and traced source lines on the satellite images. State of the art rupture model proposed by USGS Working Group in 2002 is applied to the source system. Composite reoccurren...
Linear modal combination procedure for structural dynamics Tanışer, Sadun; Sucuoğlu, Haluk; Department of Civil Engineering (2013) Earthquake engineering practice utilizes different analysis procedures in the estimation of seismic demands on structures. These procedures are mainly divided into two groups as static and dynamic procedures. Dynamic procedures are more accurate than the static procedures since they include the entire history of any response parameter during the ground motion. Nevertheless, there are also approximate but much simpler static analysis procedures that overcome high computational demands and inherent difficulti...

Citation Formats

B. Beyhan, “Buildings under recurring near-field earthquakes,” Ph.D. - Doctoral Program, Middle East Technical University, 2010.