Development of new binder for the processing and sintering of tungsten carbide cermets

Download

090692.pdf

Date

1999

Author

Aydoğan, Mehmet Emrah

Metadata

Show full item record

Item Usage Stats

122
views

0
downloads

URI

https://hdl.handle.net/11511/2651

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Development of a novel regenerable sorbent for hot gas desulfurization Aksoy, Ayşegül; Atımtay, Aysel; Department of Environmental Engineering (1994)
Development of a novel sorbent for hot gas desulfurization Derinöz, Canan; Atımtay, Aysel; Department of Environmental Engineering (1998)
Development of bifunctional catalyst for the single-step synthesis of dimethyl ether Şener, Mehmetali İlker; Sezgi, Naime Aslı; Department of Chemical Engineering (2019) Depletion of fossil fuels, global warming concerns and increasing CO2 emissions necessitated the utilization of syngas in the production of alternative fuels over the last few years. Dimethyl ether (DME) is considered as promising diesel substitute or LPG additive due to its high cetane number and good burning properties. The single-step DME synthesis method, which involves consecutive methanol formation and methanol dehydration reactions, enables the production of DME directly from the syngas. Despite the ...
Development of a laccase based paper biosensor for the detection of phenolic compounds Öktem, Hüseyin Avni; EYİDOĞAN, FÜSUN; Bayrac, Ceren; Yilmaz, Remziye (2012-04-01) Laccase (E.C.1.10.3.2, p-benzenediol: oxygen oxidoreductase) catalyzes the oxidation of various aromatic compounds, particularly phenols, which are organic pollutants, present in wastewater. With this specific function this enzyme has had a great impact on the development of biosensors for both environmentally important pollutants and clinically relevant metabolites. There are different detection procedures such as chromatographic and spectrophotometric methods to detect the presence of phenolic compounds i...
Development of a novel regenerable zinc ferrite sorbent for hot gas desulfurization Aksoy, Ayşegül (null; 1995-06-02) Integrated Gasification Combined Cycle System (IGCC) promises efficient, clean and economical electrical power generation. In this system coal is gasified under high temperature and pressure. The coal gas exiting the gasifier is cleaned from the particulates and sulfurous compounds with a `Hot Gas Cleanup` system in which metal oxide sorbents are used to remove H{sub 2}S. The cleaned gas is then used to run the gas turbines and the recovered heat is used to run the steam turbines to generate electricity wit...

Citation Formats

M. E. Aydoğan, “Development of new binder for the processing and sintering of tungsten carbide cermets,” Middle East Technical University, 1999.