Improvement of uptake rate equations depending on meteorological conditions for 25 volatile organic compounds

Date

2012-09-15

Author

CİVAN, MİHRİBAN
YURDAKUL, SEMA
Tuncel, Süleyman Gürdal

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

98
views

0
downloads

Stainless steel passive (diffusive) sampling tubes manufactured by Gradko International Ltd. (UK) were filled with Chromosorb 106 (Supelco) and evaluated to determine the uptake rates of 31 VOCs over six months under different meteorological conditions in a suburban area of Ankara, Turkey. The URs have been calculated, and dependence on such meteorological parameters as temperature, relative humidity and wind speed has been established for the 31 VOCs.

Subject Keywords

Experimental uptake rate, Volatile organic compounds, Passive sampling, Diffusive samplers, Active sampling, Multiple linear regression

URI

https://hdl.handle.net/11511/30218

Journal

TALANTA

DOI

https://doi.org/10.1016/j.talanta.2012.07.011

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Electrochemical production of molybdenum refractory metal powders Akpınar, Bengisu; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2019) Molybdenum (Mo) is a refractory metal and mostly used as an alloying agent in cast iron, steels and superalloys to enhance hardenability, strength, toughness and corrosion resistance. It also finds other uses either in the form of a pure metal or an element in, for example, lubricants and catalysts. Traditional metal production methods are not suitable for molybdenum because pure molybdenum has a very high melting point and tends to be oxidized at low temperatures. Hydrogen reduction of molybdenum oxide is ...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications Yılmaz, Olgun; Karakaya, İshak (null; 2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Production of rare earth ferrosilicide alloy Topkaya, Yavuz Ali; Geveci, Ahmet (2006-08-31) Rare earth ferrosilicide is a versatile alloy mainly used to control the detrimental effects of sulfur in steel and to modify graphite structures in cast iron.

Citation Formats

M. CİVAN, S. YURDAKUL, and S. G. Tuncel, “Improvement of uptake rate equations depending on meteorological conditions for 25 volatile organic compounds,” TALANTA, pp. 720–729, 2012, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30218.