Synthesis and characterization of V, Mo and Nb incorporated micro-mesoporous MCM-41 materials

Date

2011-01-01

Author

Solmaz, Arzu
BALCI, FATMA SUNA
Doğu, Timur

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

321
views

0
downloads

Highly microporous metal-MCM-41 ordered mesoporous structure catalysts having different metal/Si (V, Mo, Nb) atomic ratios and combinations of metal sources were hydrothermally synthesized. The structural properties estimated using different techniques were found to be in agreement with each other. Metals were successfully incorporated into MCM-41 without deteriorating the ordered hexagonal structure. The metal ions in the synthesis solutions probably settled on the hydrophilic end of the template hence the metal incorporation resulted improvements in the micropore structure. Low loading of metals caused an increase in the surface area and pore volume values of the catalysts. The highest total (1310 m(2) g(-1)) and micropore surface area values (1083 m(2) g(-1)) were obtained by Nb incorporation. The micro- and mesopore dimensions of MCM-41 increased from 0.5 to 1.1 nm and from 2.5 to 2.8 nm, respectively, with metal incorporation. Low V/Si ratios and presence of Nb in the starting solution enhanced narrow mesopore size distribution. The pore dimension and wall thickness values estimated from nitrogen adsorption and X-ray diffraction methods were consistent with the corresponding values obtained using transmission electron microscopy.

Subject Keywords

Nanostructure, Crystal structure, Microporous materials, Nitrogen adsorption

URI

https://hdl.handle.net/11511/31229

Journal

MATERIALS CHEMISTRY AND PHYSICS

DOI

https://doi.org/10.1016/j.matchemphys.2010.08.086

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Synthesis of CuO nanostructures on zeolite-Y and investigation of their CO2 adsorption properties Boruban, Cansu; Nalbant Esentürk, Emren (2017-10-01) Copper(II) oxide (CuO) nanoparticles (NPs) in two different morphologies, spiky and spherical, were synthesized on zeolite-Y by a modified impregnation method, and their CO2 adsorbing capabilities were investigated under standard conditions (1 atm and 298 K). The properties and CO2 adsorption performances of the hybrid systems were characterized by transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, X-ray photoelectron spectroscopy, atomic absorption s...
Synthesis and characterization of Ba/MCM-41 Kaya, Emine; Oktar, Nuray; Karakaş, Gürkan; Murtezaoglu, Kirali (2010-01-01) Mesoporous Ba/MCM-41 type materials (Ba/MCM-41) with high Ba/Si molar ratios between 0.025 and 0.1 were synthesized by direct hydrothermal synthesis. The samples were characterized by XRD, nitrogen adsorption, TGA-DTA, FTIR, SEM-EDS, and TEM techniques. BET surface areas of samples with various Ba loadings were found between 722 and 931 m(2)/g with 28 A average pore size, which is consistent with the pore size of 30 A for pure MCM-41 samples synthesized by the same procedure. The crystal structures of synth...
Synthesis and electrochromic properties of trans-stilbene bearing copolymers obtained with different repeat unit and chain length Karakus, Melike; Nurioglu, Ayda Goycek; Akpinar, Hava Zekiye; Toppare, Levent Kamil; Çırpan, Ali (Elsevier BV, 2013-6) Three new random copolymers containing benzotriazole (BTz), thiophene (Th) and trans-stilbene (St) were synthesized via Stille coupling technique with different monomer ratios. In order to determine the effect of stilbene quantity on electrochromic properties of the polymers, feed ratios of the monomers were altered in chemical polymerization. Polymer chain length effect was also investigated via using different reaction times and the same feed ratio. The characteristics of the synthesized copolymers were c...
Synthesis and characterization of a new soluble conducting polymer and its electrochromic devices Sahin, Elif; Sahmetlioglu, Ertugrul; Akhmedov, Idris M.; Tanyeli, Cihangir; Toppare, Levent Kamil (Elsevier BV, 2006-10-01) A new polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-(perfluorophenyl)-2,5-di(2-thienyl)-1H-pyrrole (FPTPy). The structures of both the monomer and the soluble polymer were elucidated by nuclear magnetic resonance (H-1-NMR) and fourier transform infrared (FTIR). Polymer of FPTPy was also synthesized via potentiostatic electrochemical polymerization in acetonitrile (AN)/NaClO4/LiClO4 (0.1 M:0.1 M) Solvent-electrolyte couple. Characterizations of th...
Synthesis and Characterization of a New Conducting Polymer Based on 4-(2,5-di-2-thiophen-2-yl-pyrrol-1-yl)-phthalonitrile Yavuz, Arzu; Bezgin, Buket; Önal, Ahmet Muhtar (Wiley, 2009-12-05) A new conducting polymer was synthesized by electrochemical polymerization of 4-(2,5-di-2-thiophen-2-yl-pyrrol-1-yl)-2-phthalonitrile (SNS-PN). Electrochemical polymerization of SNS-PN was performed in acetonitrile/0.2M LiClO4 solvent/electrolyte couple. Characterizations of the resulting polymer P(SNS-PN) were carried out by cyclic voltammetry, UV-vis, and Fourier transform infrared (FTIR) spectroscopic techniques. Spectroelectrochemical studies revealed that P(SNS-PN) has an electronic band gap of 2.45 eV...

Citation Formats

A. Solmaz, F. S. BALCI, and T. Doğu, “Synthesis and characterization of V, Mo and Nb incorporated micro-mesoporous MCM-41 materials,” MATERIALS CHEMISTRY AND PHYSICS, pp. 148–155, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/31229.