Experimental characterization of a tuned vibration absorber

Date

2016-01-01

Author

Aksoy, Tuğrul
Özgen, Gökhan Osman
Acar, Bülent
Gençoğlu, Caner

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

228
views

0
downloads

In this paper, experimental characterization studies conducted for a tuned vibration absorber is presented. The tuned vibration absorber has been particularly designed to reduce transverse resonant vibration response of a supported cylinder structure at its dominant two modes. Various testing configurations and techniques have been used such as transmissibility measurements, frequency response measurements, sweep sine testing, impact testing, and random testing. Different testing approaches were needed to explain the differences between actual TVA characteristics and the initial design objectives. Finally, structure and tuned vibration absorber are tested together to check the actual vibration reduction performance of the tuned vibration absorber.

Subject Keywords

Tuned vibration absorbers, Magnetic damping, Sine-sweep testing, Random testing, Experimental characterization

URI

https://hdl.handle.net/11511/33351

DOI

https://doi.org/10.1007/978-3-319-29859-7_18

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels Gür, Cemil Hakan; Çam, İbrahim (Elsevier BV, 2007-05-01) The aim of this study is to compare the performance of magnetic Barkhausen noise and ultrasonic methods for the evaluation of the microstructure of commercial steels. Following the austenitization of the specimens made of SAE 1040 and SAE 4140, various heat treatments were carried out to obtain microstructures consisting of martensite, tempered martensite, fine pearlite-ferrite, and coarse pearlite-ferrite. The microstructures were initially characterized by SEM investigation and hardness measurements. The ...
Experimental characterization of collapse-mode CMUT operation Oralkan, Omer; Bayram, Barış; Yaralioglu, Goksen G.; Ergun, A. Sanli; Kupnik, Mario; Yeh, David T.; Wygant, Ira O.; Khuri-Yakub, Butrus T. (2006-08-01) This paper reports on the experimental characterization of collapse-mode operation of capacitive micromachined ultrasonic transducers (CMUTs). CMUTs are conventionally operated by applying a direct current (DC) bias voltage less than the collapse voltage of the membrane, so that the membrane is deflected toward the bottom electrode. In the conventional regime, there is no contact between the membrane and the substrate; the maximum alternating current (AC) displacement occurs at the center of the membrane. I...
Improvement of finite element model by using sine vibration test results of acommunication satellite Çekiç, Abdulkadir; Yaman, Yavuz; Department of Aerospace Engineering (2021-2-15) In this thesis, the vibration analysis of a communication satellite is performed,and the improvementof the finite element model by using vibration test results is presented. First, the satellite finite element model isgenerated using MSC/PATRAN and MSC/NASTRAN commercial software. With the natural frequency and frequency response analysis, the expected frequency values and response amplitudes in accelerometers arecalculated in vibration tests. The results obtained in the vib...
Nonlinear free vibrations of curved double walled carbon nanotubes using differential quadrature method Ciğeroğlu, Ender (Elsevier BV, 2014-11-01) Nonlinear free vibration analysis of curved double-walled carbon nanotubes (DWNTs) embedded in an elastic medium is studied in this study. Nonlinearities considered are due to large deflection of carbon nanotubes (geometric nonlinearity) and nonlinear interlayer van der Waals forces between inner and outer tubes. The differential quadrature method (DQM) is utilized to discretize the partial differential equations of motion in spatial domain, which resulted in a nonlinear set of algebraic equations of motion...
Investigation of photovoltaic properties of amorphous InSe thin film based Schottky devices Yilmaz, K.; Parlak, Mehmet; Ercelebi, C. (IOP Publishing, 2007-12-01) In this study, device behavior of amorphous InSe thin films was investigated through I-V, C-V and spectral response measurements onto SnO2/p-InSe/metal Schottky diode structures. Various metal contacts such as Ag, Au, Al, In and C were deposited onto amorphous p-InSe films by the thermal evaporation technique. The best rectifying contact was obtained in a SnO2/p-InSe/Ag Schottky structure from I-V measurements, while the Au contact had poor rectification. Other metal contacts (Al, In and C) showed almost oh...

Citation Formats

T. Aksoy, G. O. Özgen, B. Acar, and C. Gençoğlu, “Experimental characterization of a tuned vibration absorber,” 2016, vol. 5, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/33351.