Conductive polyaniline poly(methyl methacrylate) films obtained by electropolymerization

1996-02-28
Karakisla, M
Sacak, M
Akbulut, Ural
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
162
views
0
downloads
Electrochemical polymerization of aniline, on a Pt foil electrode coated with poly(methyl methacrylate) (PMMA), produces a homogeneous, free-standing, flexible, and conductive polymer film. The conductivity of the films depends on the aniline content and reaches 0.1-0.2 S/cm for films having aniline content of 15% or more. The optimum thickness of precoated PMMA to obtain durable conducting films was found to be in the range of 10-15 mu m. Cyclic voltammetric investigation revealed that aniline exhibits a similar electrochemical behavior on a PMMA coated platinum electrode similar to a bare Pt surface. The film gives a fast and reproducible response against ammonia gas within a concentration range of 1.0-0.01%. Scanning electron micrographs indicate that the films have a rough structure consisting of globular regions. (C) 1996 John Wiley & Sons, Inc.
Electrochemical synthesis, Composite films, Polymers, Polypyrrole, Polymerization, Aniline, Transparent, Electrodes, Pyrrole, Blends
https://hdl.handle.net/11511/35413
Department of Chemistry, Article

Suggestions

Conducting polymer composites of polypyrrole and polyimide
Selampinar, F; Akbulut, Ural; Toppare, Levent Kamil (1997-01-01)
A conducting composite of polypyrrole with a polyimide as the insulating matrix polymer was prepared via electrochemical methods. The characterization of the composite was done by FTIR, SEM and TGA studies. Conductivity and solubility studies together with spectroscopic methods reveal that a chemical interaction between the two polymers exists.
Conductive coating materials
Çakar, İlknur; Bayram, Göknur; Department of Chemical Engineering (2006)
In this study, electrically conductive coating materials composed of epoxy resin and carbon black (CB) were prepared by applying two different mixing techniques (Grinding and Mechanical Mixing). The effect of carbon black addition, ultrasonication, mixing type and surface modification of carbon black on the morphologies, electrical and mechanical properties of the composites were investigated. According to test results, Grinding Method is much more efficient and for this method, percolation concentration wa...
Electrochemical polymerization of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole as a novel immobilization platform for microbial sensing
Tuncagil, Sevinc; ODACI DEMİRKOL, DİLEK; Varis, Serhat; TİMUR, SUNA; Toppare, Levent Kamil (2009-09-01)
Two types of bacterial biosensor were constructed by immobilization of Gluconobacter oxydans and Pseudomonas fluorescens cells on graphite electrodes modified with the conducting polymer; poly(1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole) [SNS(NO2)]. The measurement was based on the respiratory activity of cells estimated by the oxygen consumption at -0.7 V due to the metabolic activity in the presence of substrate. As well as analytical characterization, the linear detection ranges, effects of electropo...
Electrochromic properties of multicolored novel polymer synthesized via combination of benzotriazole and N-functionalized 2,5-di(2-thienyl)-1H-pyrrole units
Rende, Eda; Kilic, Cihan E.; Udum, Yasemin Arslan; Toffoli, Daniele; Toppare, Levent Kamil (2014-08-20)
Synthesis of new conducting polymers is desired since their electrochemical and optical properties enable them to be used as active layers in many device applications. Benzotriazole and N-functionalized 2,5-di(2-thienyl)-1H-pyrrole (SNS Series) containing polymers showed very promising results as electrochromic materials. In order to observe the effect of the combination of these two units, three new monomers; 2-(6-(2,5-bis(5-methylthiophen-2-yl)-1H-pyrrol-1-yl)hexyl)-4,7-di(thiophen-2-yl)-2H benzo[d][1,2,3...
Mechanical and optical properties of SiO2 thin films deposited on glass
Simurka, Lukas; Ctvrtlik, Radim; Tomastik, Jan; Bektaş, Gence; Svoboda, Jan; Bange, Klaus (2018-09-01)
The optical and mechanical properties of amorphous SiO2 films deposited on soda-lime silicate float glass by reactive RF magnetron sputtering at room temperature were investigated in dependence of the process pressure. The densities of the films are strongly influenced by the process pressure and vary between 2.38 and 1.91 g cm(-3) as the pressure changes from 0.27 to 1.33 Pa. The refractive indices of the films shift between 1.52 and 1.37, while the residual compressive stresses in the deposited films vary...
Citation Formats
M. Karakisla, M. Sacak, and U. Akbulut, “Conductive polyaniline poly(methyl methacrylate) films obtained by electropolymerization,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 1347–1354, 1996, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35413.
METU IIS - Integrated Information Service open@metu.edu.tr