Strontium doped hydroxyapatite biomimetic coatings on Ti6Al4V plates

Date

2017-08-15

Author

AVCI, Muhammed
YILMAZ, Bengi
Tezcaner, Ayşen
Evis, Zafer

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

135
views

0
downloads

Titanium (Ti) and its alloys are the most attractive metallic biomaterials since their first introduction to the biomedical area. Their major drawback is that they do not promote complete osteointegration due to their low bioactivity; thus, it is necessary to perform a surface treatment or apply a surface coating to increase the initial formation of surrounding bone tissue. In this study, strontium (Sr)-doped hydroxyapatite (HA) coatings on Ti6Al4V substrates were prepared by biomimetic method in which 2 times concentrated simulated body fluid (2xSBF) solution was used as the apatite growth medium. The characterization studies with X-ray diffraction (XRD) and scanning electron microscopy (SEM) indicated that as the amount of strontium ion (Sr2+) replacing with calcium ion (Ca2+) in the structure increases, crystallinity decreases without causing a significant change in morphology of the HA deposits. Incorporation of Sr2+ ions resulted in the disappearance of Fourier transform infrared (FTIR) bands of carbonate ion (CO32-) which was found in the structure of pure HA biomimetic coating. The biological results demonstrated that Sr-doped HAs presented no cytotoxicity on Saos-2 cells. This study showed that the incorporation of Sr into apatitic structure is possible by mimicking the natural route and this procedure yields a promising bioactive coating on Ti alloys to be used in bone replacement therapies especially associated with osteoporosis.

Subject Keywords

Biomedical Applications, Apatite, Surfaces, Ion Doping, Selenium, Ti Alloy

URI

https://hdl.handle.net/11511/36920

Journal

CERAMICS INTERNATIONAL

DOI

https://doi.org/10.1016/j.ceramint.2017.04.117

Collections

Department of Engineering Sciences, Article

Suggestions

OpenMETU
Core

In vitro cytotoxicity, corrosion and antibacterial efficiencies of Zn doped hydroxyapatite coated Ti based implant materials Buyuksungur, Senem; YILGÖR HURİ, PINAR; Schmidt, Jürgen; Pana, Iulian; Dinu, Mihaela; Vitelaru, Catalin; Kiss, Adrian E.; Tamay, Dilara Goksu; Hasırcı, Vasıf Nejat; Vladescu, Alina; Nesrin Hasirci, Hasirci (2023-01-01) Ti6Al4V alloy is successfully used as implant material in dental and orthopedic surgeries for years due to its much better compatibility, lower density, corrosion resistance, etc. compared to the other metals. Meantime, modification of the surface of these alloys is needed to enhance material-tissue interaction and osteointegration between the implant and the bone. In this study, Ti6Al4V alloy surfaces were modified by application of RF magnetron sputtering technique and coated with zinc (Zn) doped hydroxya...
Co-doped hydroxyapatites as potential materials for biomedical applications YILMAZ, BENGİ; ALSHEMARY, AMMAR ZEIDAN GHAILAN; Evis, Zafer (2019-01-01) Hydroxyapatite (HA) is a synthetic biomaterial resembling the composition of mammalian hard tissue and thus, it is widely employed as a bone graft material, hard tissue engineering scaffold and coating layer for metallic substrates. Biological apatite is non-stoichiometric in nature. It is composed of small crystals and characterized by poor crystallinity and relatively high solubility with respect to stoichiometric HA. Chemical compositions of these crystals consist of Ca, P and trace amounts of various io...
Combined effects of ALS and SLS on Al2O3 reinforced composite nickel coatings Yılmaz, Olgun; Karakaya, I. (Informa UK Limited, 2020-05-03) The mechanical and tribological properties of electrochemical coatings can be enhanced by the embedded second phase particles to nickel matrix. Two different anionic surfactants sodium dodecyl sulfate and ammonium lignosulfonate were used together to adjust the wetting conditions and provide the suspension of Al2O3 particles in a nickel sulfamate electrolyte in this study. The effects of current density and amounts of the two surfactants on wear rate, coefficient of friction, and hardness were studied. It w...
Synthesis of TiB2-reinforced iron-based composite coating YILMAZ, SEVAL; Ozenbas, M.; YAZ, Mehmet (Elsevier BV, 2009-08-01) Titanium diboride (TiB2) particulate reinforced Fe-based alloy composite coating was produced with ferrotitaniurn (FeTi), ferroboron (FeB), ferrotungsten (FeW), ferrochromium (FeCr), ferrovanadium (FeV) and ferromolybdenum (FeMo) powders by using gas tungsten arc welding (GTAW) process. The effects of GTAW processing on the microstructure of AISI-4340 alloy coating with ferro-alloy powders were investigated experimentally. Abrasive wear tests were performed on the coated surface of samples to examine the in...
Review of magnesium-based biomaterials and their applications Sezer, Nurettin; Evis, Zafer; Kayhan, Said Murat; Tahmasebifar, Aydin; Koc, Muammer (2018-03-01) In biomedical applications, the conventionally used metallic materials, including stainless steel, Co-based alloys and Ti alloys, often times exhibit unsatisfactory results such as stress shielding and metal ion releases. Secondary surgical operation(s) usually become inevitable to prevent long term exposure of body with the toxic implant contents. The metallic biomaterials are being revolutionized with the development of biodegradable materials including several metals, alloys, and metallic glasses. As suc...

Citation Formats

M. AVCI, B. YILMAZ, A. Tezcaner, and Z. Evis, “Strontium doped hydroxyapatite biomimetic coatings on Ti6Al4V plates,” CERAMICS INTERNATIONAL, pp. 9431–9436, 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/36920.