Electropolymerization of a New 4-(2,5-Di-2-thiophen-2-yl-pyrrol-1-yl)-Tetra Substituted Nickel Phthalocyanine Derivative

2011-10-15
Yavuz, Arzu
Carbas, Buket Bezgin
Aras, Leyla
Önal, Ahmet Muhtar
A new tetrakis 4-(2,5-di-2-thiophen-2-yl-pyrrol-1-yl) substituted nickel phthalocyanine (NiPc-SNS) was synthesized and characterized by elemental analysis, Fourier Transform Infrared (FT-IR), and UV-vis spectroscopies. The electrochemical polymerization of this newly synthesized NiPc-SNS was performed in dichloromethane (DCM)/tetrabutylammonium perchlorate (TBAP) solvent/electrolyte couple. An insoluble film was deposited on the electrode surface, both during repetitive cycling and constant potential electrolysis at 0.85 V. Resulting polymer film, P(NiPc-SNS), was characterized utilizing UV-vis and FT-IR spectroscopic techniques and its electrochemical behavior was investigated via cyclic voltammetry (CV). Spectroelectrochemical behavior of the polymer film on indium tin oxide (ITO) working electrode was investigated by recording the electronic absorption spectra, in situ, in monomer-free electrolytic solution at different potentials and it is found that the P(NiPc-SNS) film can be reversibly cycled between 0.0 and 1.1 V and exhibits electrochromic behavior; dark olive green in the neutral and dark blue in the oxidized states with a switching time of 1.98 s. Furthermore, the band gap of P(NiPc-SNS) was calculated as 2.27 eV from the onset of pi-pi* transition of the conjugated backbone. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 1293-1299, 2011
JOURNAL OF APPLIED POLYMER SCIENCE

Suggestions

Kinetic study of the reaction between hydroxyl-terminated polybutadiene and isophorone diisocyanate in bulk by quantitative FTIR spectroscopy
Kincal, D; Özkar, Saim (Wiley, 1997-12-05)
A kinetic study of the reaction between a hydroxyl-terminated polybutadiene (HTPB) and isophorone diisocyanate (IPDI) was carried out in the bulk state by using quantitative Fourier transform infrared(FTIR) spectroscopy. The reaction is shown to obey a second-order rate law, being first order in both the HTPB and IPDI concentrations. The activation parameters obtained from the evaluation of kinetic data are Delta H-double dagger = 41.1 +/- 0.4 kJ mol, Delta S-double dagger = -198 +/- 2 J K-1 mol(-1) and E-a...
Synthesis of N-polyethereal polypyrroles and their application for the preconcentration of rare earth ions
Koksel, Bahar; CİHANER, ATİLLA; Kaya, Murat; Volkan, Mürvet; Önal, Ahmet Muhtar (Wiley, 2008-05-15)
Conducting polymers containing polyether pseudocages (PI, PII, PIII) have been synthesized via chemical oxidation of 1,5-bis(1,1-pyrrole)-3-oxabutane (MI), 1,8-bis(I,I-pyrrole)-3,6-dioxahexane (MII), and 1,11-bis(1,1-pyrrole)-3,6,9-trioxaundecane (MIII) using anhydrous FeCl3 in CHCl3. Because as obtained polymer resins did not give any response toward any cations, they were reduced (undoped) using chemical reducing agents. Tetrabutylammonium hydroxide was found to be more effective in undoping to obtain mor...
Thermal stability and decomposition mechanism of poly(p-acryloyloxybenzoic acid and poly(p-methacryloyloxybenzoic acid) and their graft copolymers with polypropylene, Part II
Cetin, S.; Tincer, T. (Wiley, 2008-04-05)
Thermal stability and decomposition mechanism of poly(p-acryloyloxybenzoic) acid (PABA), p-methacryloyloxybenzoic acid (PMBA), and their graft coproducts of PP were studied by differential scanning calorimetry, direct pyrolysis mass spectrometry, and TG/IR system, combined thermogravimetric analyzer, and FTIR spectrometer. The homopolymers and corresponding grafts were found to be stable in nitrogen atmosphere but started to decompose under atmospheric conditions when heated above 230 degrees C. PABA and PA...
Electrochemical and Optical Studies of Furan and Thieno[3,2-b]thiophene End Capped Benzotriazole Derivatives
AKBASOGLU, Naime; BALAN, Abidin; BARAN, Derya; Çırpan, Ali; Toppare, Levent Kamil (Wiley, 2010-12-01)
Two new 2-dodecyl benzotriazole (BTz) based donor-acceptor-donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2-b]thiophene (TT) endcapped BTz monomers. Furan based and thieno[3,2-b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetr...
Electrosynthesis of polyfuran in acetonitrile-boron trifluoride-ethyl ether mixture and its device application
Tirkeş, Süha; Önal, Ahmet Muhtar (Wiley, 2007-01-15)
Electrochemical polymerization of furan was achieved in acetonitrile/boron trifluoride/ethyl ether (CH3 CN/BF3/EE) mixture in the presence of tetrabutylammonium tetrafluoroborate via constant potential electrolysis at 1.4 V versus Ag/AgCl. Electrochemical behavior of furan was investigated in the same solvent mixture of varying ratios, utilizing cyclic voltammetry. Free-standing polyfuran (PFu) films were obtained in CH3CN/BF3/EE mixture (2/4/4; v/v/v) and characterized using FTIR spectroscopic technique. S...
Citation Formats
A. Yavuz, B. B. Carbas, L. Aras, and A. M. Önal, “Electropolymerization of a New 4-(2,5-Di-2-thiophen-2-yl-pyrrol-1-yl)-Tetra Substituted Nickel Phthalocyanine Derivative,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 1293–1299, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/39616.