Preparation of conductive polybenzoxazines by oxidative polymerization

2007-03-15
Kiskan, Baris
Yagci, Yusuf
Sahmetlioglu, Ertugrul
Toppare, Levent Kamil
precursors were prepared by oxidative polymerization 3-phenyl-3,4-dihydro-2H-benzo[e][1,3] oxazine (P-a) alone and in the presence of thiophene (Th) with ceric ammonium nitrate in acetonitrile. The structure of the precursors was confirmed by FTIR, H-1 NMR, and DSC measurements, indicating the presence of a cyclic benzoxazine structure, together with small but varying amount of a ring opened phenolic structure. The resulting polymers exhibit conductivities around 10(-2) S cm(-1) and undergo thermal curing at various temperatures. Attempts to copolymerize P-a with another electroactive monomer, pyrrole (Py), by a similar redox process were unsuccessful, which was attributed to the unfavourable oxidation potential of Py. The cured products exhibited high thermal stability but lower conductivity, than those of the precursors. (c) 2006 Wiley Periodicals, Inc.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY

Suggestions

Synthesis and characterization of conducting graft copolymers based on oligophenols
Sahmetlioglu, Ertugrul; Arikan, Ufuk; Toppare, Levent Kamil; Yuruk, Huseyin; Mart, Hasan (Informa UK Limited, 2006-10-01)
Oligo-2-aminophenol (OAF) was synthesized with oxidative polycondensation of 2-aminophenol and hydrogen peroxide in an aqueous alkaline medium at 80 degrees C. Oligo-2-aminophenol with thiophene side groups (TOAF) was obtained by the reaction of OAF and thiophene-3-acetic acid. Graft copolymers of TOAF and pyrrole were synthesized by electrochemical polymerization in p-toluene sulfonic acid (PTSA)/water medium. Characterization of the graft copolymer (TOAF-g-Py), was carried out by combination of techniques...
Polymerization and dipole moment of poly(allyl cyanide)
Küçükyavuz, Zühal; Usanmaz, Ali; Testereci, Şenay (Elsevier BV, 1990-9)
Polymerization of allyl cyanide was carried out by radiation and chemical catalysis. Polymers obtained by γ-rays under various conditions such as in bulk and in the presence of either air or 0.1 mol% ZnCl2 were oily or solid dark-brown products with molecular weights up to 1.4 × 104. The polymers obtained by n-BuLi was a pale-yellow solid, insoluble in common organic solvents and water. No polymer was obtained with BF3O(C2H5)2. The mechanism of polymerization was shown by infra-red investigation to be diffe...
Synthesis of conducting block and graft copolymers with polyether segments
Yagci, Y; Toppare, Levent Kamil (Wiley, 2000-07-01)
Synthesis of block and graft copolymers containing polyether and conducting polypyrrole sequences were described. Pyrrole moieties were incorporated at the chain ends of polytetrahydrofuran and polysiloxane and at the side chains of polyethyl vinylether by ionic polymerization and appropriate chemical reactions. Subsequent electropolymerization with pyrrole through these moities yielded free standing films of the corresponding block and graft copolymers. The formation copolymers was evidenced by FTIR spectr...
Synthesis and characterization of fully aromatic thermotropic liquid-crystalline copolyesters containing m-hydroxybenzoic acid units
Yerlikaya, Z; Aksoy, S; Bayramlı, Erdal (Wiley, 2001-10-01)
A series of fully aromatic copolyesters based on p-acetoxybenzoic acid (p-ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m-acetoxybenzoic acid (m-ABA) were prepared by a modified melt-polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, H-1 NMR, polarized optical microscopy, X-ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid-crystalline phases in a broad temperature range of about 150 degreesC, w...
Synthesis and Characterization of Conducting Copolymers of Bisphenol A-Diglycidyl Ether with Thiophene Side-Groups and Pyrrole
Sahmetlioglu, Ertugrul; Varol, Ramazan; Toppare, Levent Kamil; Yuruk, Huseyin (Informa UK Limited, 2009-01-01)
Copolymers of bisphenol A-diglycidyl ether with thiophene side-groups and pyrrole were synthesized by electrochemical polymerization. Bisphenol A-diglycidyl ether with thiophene side-groups (DGEBATh) was obtained from the reaction between bisphenol A-diglycidyl ether (DGEBA) and thiophene-3-acetic acid. The syntheses of copolymers of DGEBATh and pyrrole were achieved electrochemically using three different supporting electrolytes, p-toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylam...
Citation Formats
B. Kiskan, Y. Yagci, E. Sahmetlioglu, and L. K. Toppare, “Preparation of conductive polybenzoxazines by oxidative polymerization,” JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, pp. 999–1006, 2007, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/40408.