Boron, a source indicator for the differentiation of origin of the total phosphorus in waste water.

1976
Salihoğlu , Işıl

Suggestions

Boron removal from aqueous solutions via polymer enhanced ultrafiltration using novel Imino-bis-propane diol functional polymers
Zerze, Hasan; Özbelge, H. Önder; Yılmaz, Levent; Department of Chemical Engineering (2012)
In this work, newly synthesized poly (vinyl amino-N, N’-bis-propane diol) (GPVA) and copolymer, poly (vinyl amino-N, N’-bis-propane diol-co-DADMAC) (GPVA-co-DADMAC) were efficiently exploited for boron removal via polymer enhanced ultrafiltration (PEUF). Boron concentration could be reduced from 10ppm down to 0.4ppm using GPVA whereas it could be reduced from 10ppm down to 0.8ppm with copolymer GPVA-co-DADMAC at pH 9 and loading (boron-to-polymer mass ratio) 0.001 via continuous polymer enhanced ultrafiltra...
Boron doped hydroxyapatites in biomedical applications
Uysal, İdil; Yılmaz, Bengi; Evis, Zafer (2020-12-01)
Hydroxyapatite has been widely used in biomedical applications as a coatingmaterial for implant surfaces, a drug carrier, a scaffold or composite for bonetissue engineering applications. The highly ionic structure of hydroxyapatite allowsdoping of various ions, resulting in an improvement in its properties. Boron is oneof the elements which can be doped into hydroxyapatite structure by replacingphosphate (PO43-) or hydroxyl (OH-) sites to obtain scaffolds for bone tissueengineering applications or a coating...
Boron and phosphorus doped polycrystalline silicon thin films fabricated by aluminium induced crystallization and solid phase epitaxial thickening techniques
Tüzün Özmen, Özge; Karaman, Mehmet; Sedani, Salar Habibpur; Şağban, Hüseyin Muzaffer; Turan, Raşit (null; 2018-07-04)
Boron trifluoride mediated Prins reaction of methylene diacetate with styrenes. One-pot synthesis of 3-chloro-3-arylpropanols
İŞLEYEN, ALPER; Doğan, Özdemir (Georg Thieme Verlag KG, 2006-05-03)
A one-pot procedure was developed for the synthesis of 3-chloro-3-arylpropanols, which are important starting materials for the synthesis of biologically active benzanilide derivatives. Styrenes were reacted with methylene diacetate in the presence of boron trifluoride to give the corresponding 3-chloro-3-arylpropanols in 36-84% yield by the Prins reaction. A strongly electron-donating methoxy substituent at either the ortho or para position of the styrene did not give the expected 3-chloro-3-arylpropanols ...
Boron coating on boron nitride coated nuclear fuels by chemical vapor deposition
Durmazucar, HH; Gündüz, Güngör (2000-12-01)
Uranium dioxide-only and uranium dioxide-gadolinium oxide (5% and 10%) ceramic nuclear fuel pellets which were already coated with boron nitride were coated with thin boron layer by chemical vapor deposition to increase the burnup efficiency of the fuel during reactor operation. Coating was accomplished from the reaction of boron trichloride with hydrogen at 1250 K in a tube furnace, and then sintering at 1400 and 1525 K. The deposited boron was identified by infrared spectrum. The morphology of the coating...
Citation Formats
I. Salihoğlu, “Boron, a source indicator for the differentiation of origin of the total phosphorus in waste water.,” Middle East Technical University, 1976.