Axial solid mixing and the dispersion coefficient fluidization velocity relationship in a fluidized bed.

1979
Altun, Metin
Show full item record
114
views
0
downloads
https://hdl.handle.net/11511/4149
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Axial mixing of solids in a fluidized bed.
Bozay, M. Kemâl; Department of Chemical Engineering (1979)
AXIAL DISPERSION OF LIQUID IN MOBILE-BED CONTACTING
Uysal, B.Z; Özilgen, M. (Informa UK Limited, 1989-7)
Axial dispersion of liquid in Mobile-Bed Contacting (MBC) was investigated employing transient-response technique with impulse input of NaCI tracer. Experiments were performed in a 0.195 m ID column. Three different packing diameters (15, 19.5 and 32 mm) and three different static bed heights (0.1, 0.195 and 0.3 m) were used. Gas flow rate was varied between 3.02 and 4.05 kg/m2/s and liquid flow rate from 2.4 to 10.4 kg/m2/s. Transfer function analysis of data yielded that Peclet number was practically ind...
Axial vector transition form factors of N -> Delta in QCD
Küçükarslan, Ayşe; Özdem, Ulaş; Özpineci, Altuğ (Elsevier BV, 2016-12)
The isovector axial vector form factors of N -> Delta transition are calculated by employing Light-cone QCD sum rules. The analytical results are analyzedby both the conventional method, and also by a Monte Carlo based approach which allows one to scan all of the parameter space. The predictions are also compared with the results in the literature, where available. Although the MonteCarlo analysis predicts large uncertainties in the predicted results, the predictions obtained by the conventional analysis ar...
Axially symmetrical stress distributions in a thick elastic layer.
Akcan, Sadettin; Department of Engineering Sciences (1975)
LONGITUDINAL ELASTIC-WAVE PROPAGATION AND ENERGY FLUX AT A DISCONTINUITY OF 2 DISSIMILAR SEMIINFINITE CIRCULAR RODS
Yıldırım, Raif Orhan (1994-10-01)
Elastic wave propagation through an area discontinuity of two dissimilar, bonded, semi-infinite circular rods is investigated analytically. In particular, the variations of the coefficients of stress reflection and transmission are determined in terms of the nondimensional cross sectional area and mechanical impedance parameters. The coefficients of energy flux reflection and transmission are also included. Then, the case is generalized to include a rigid mass attached at the discontinuity.
Citation Formats
M. Altun, “Axial solid mixing and the dispersion coefficient fluidization velocity relationship in a fluidized bed.,” Middle East Technical University, 1979.
METU IIS - Integrated Information Service open@metu.edu.tr