Dynamic analysis of a gas fluidized bed using an adsorptive tracer.

1980
Özünal, Yasemin

Suggestions

Dynamic analysis of a three-phase induction motor employing cycle-selection method of control.
Ermiş, Muammer; Department of Electrical Engineering (1976)
Dynamic analysis of piping systmes using transfer matrix method.
Akdoğan, İsmail Gürkan; Department of Mechanical Engineering (1992)
Dynamic analysis of buried pipelines.
Imer, Fatih; Department of Civil Engineering (1984)
Dynamic analysis of capacitive micromachined ultrasonic transducers
Bayram, Barış; Kupnik, M; Ergun, AS; Oralkan, O; Nikoozadeh, A; Khuri-Yakub, BT (Institute of Electrical and Electronics Engineers (IEEE), 2005-12-01)
Electrostatic transducers are usually operated under a DC bias below their collapse voltage. The same scheme has been adopted for capacitive micromachined ultrasonic transducers (cMUTs). DC bias deflects the cMUT membranes toward the substrate, so that their centers are free to move during both receive and transmit operations. In this paper, we present time-domain, finite element calculations for cMUTs using LS-DYNA, a commercially available finite element package. In addition to this DC bias mode, other ne...
Dynamic simulation of fluidized bed combustors and its validation against measurements
Selçuk, Nevin; Degirmenci, E (2001-01-01)
A dynamic mathematical model of a continuous atmospheric bubbling fluidized bed combustor (ABFBC) has been developed on the basis of first principles and used to correlate data from a pilot-scale combustor, The model accounts for bed and freeboard hydrodynamics, volatiles release and combustion, char particles combustion and their size distribution, and heat transfer. The solution procedure of dynamic model employs method of lines (MOL) approach for the solution of the governing nonlinear partial differenti...
Citation Formats
Y. Özünal, “Dynamic analysis of a gas fluidized bed using an adsorptive tracer.,” Middle East Technical University, 1980.