Electrochemical co-polymerization of a novel fluorene derivative with 3,4-ethylenedioxythiophene

Date

2009-07-01

Author

Bezgin, Buket
Yagan, Aziz
Önal, Ahmet Muhtar

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

229
views

0
downloads

The co-polymerization of a novel fluorene derivative, N-(9H-fluoren-9-ylidene)benzamine (FBA), with 3,4-ethylenedioxythiophene (EDOT) was successfully achieved in acetonitrile via direct anodic oxidation of the monomer mixtures both on platinum and indium-tin oxide working electrodes. The characterization of copolymer films, poly(EDOT-co-FBA), was carried out utilizing electrochemical, spectroelectrochemical, electrochemical impedance (EIS), and FT-IR techniques. It is found that poly(EDOT-co-FBA) films which were synthesized with a feed ratio of FBA/EDOT 5/2 via both potentiodynamically and potentiostatically, had different properties than that of electrochemically prepared poly(3,4-ethylenedioxythiophene) (PEDOT) film. Spectroelectrochemical investigations revealed that copolymer films exhibit relatively lower band gap (1.63 eV) than that of polyfluorenes. Electrochemical impedance spectroscopy (EIS) was also employed to investigate both the resistance and capacitance properties of copolymer coatings.

Subject Keywords

Analytical Chemistry, Electrochemistry, General Chemical Engineering

URI

https://hdl.handle.net/11511/43030

Journal

JOURNAL OF ELECTROANALYTICAL CHEMISTRY

DOI

https://doi.org/10.1016/j.jelechem.2009.04.011

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Spectroelectrochemical investigation of the anodic oxidation of dibenzo-18-crown-6 Cihaner, A; Önal, Ahmet Muhtar (Elsevier BV, 2004-10-01) Poly(dibenzo-18-crown-6) (poly-DB18C6) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as the solvent and tetrabutylammonium tetrafluoroborate (TBABF(4)) or tetrabutylammonium hexafluorophosphate (TBAPF(6)) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in situ ESR and in situ UV-Vis spectroscopic techniques. Spectroelectrochemical (SPEL), properties and thermal analysis of the resulting po...
Electrochemical polymerization of 9-fluorenone Cihaner, A; Tirkeş, Süha; Önal, Ahmet Muhtar (Elsevier BV, 2004-07-01) Electrochemical polymerization of 9-fluorenone, FO, was studied in CH2Cl2 solution with tetrabutylammonium tetrafluoroborate, TBABF(4), as the electrolyte, via constant potential electrolysis, CPE. Prior to CPE, the redox behavior of FO was investigated in the same solvent/electrolytic medium using cyclic voltammetry, CV. CPE of FO yielded an insoluble polymer deposit on the electrode surface. The product was characterized by FTIR spectroscopy techniques. The redox and spectroelectrochernical, SPEL, behavio...
Conducting copolymers of thiophene functionalized polystyrenes with thiophene Sahin, E; Camurlu, P; Toppare, Levent Kamil; Mercore, VM; Cianga, I; Yagci, Y (Elsevier BV, 2005-06-01) Thiophene capped polystyrenes (TCP1, TCP2) were synthesized by atom transfer radical polymerization of styrene followed by Suzuki condensation with 2-thiophene boronic acid. Electrically conducting graft polymers of TCP1 and TCP2 with thiophene were achieved by electrochemical methods. Characterization of the graft polymers were performed by cyclic voltammetry (CV), Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy analyses. Electrochromic properties of...
Synthesis and polymerization of 2-and 3-substituted thiophene derivatives linked by polyether bridges Tirkeş, Süha; Önal, Ahmet Muhtar (Elsevier BV, 2004-11-15) New compounds consisting of 2- and 3-thienyl units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis (CPE) in an electrolytic solution containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF(6)) dissolved in CH3CN. 2-Thienyl monomers (I and II), but not 3-thienyl monomers (III and IV), were also polymerized via chemical oxidation, which yielded broken pi-conjugated polymer products. The polymers were characteri...
Synthesis, characterization and optoelectrochemical properties of poly(1,6-bis(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)hexane) and its copolymer with EDOT Ak, Metin; Sahmetlioglu, Ertugrul; Toppare, Levent Kamil (Elsevier BV, 2008-09-01) A new polythiophene derivative was synthesized by electrochemical oxidative polymerization of 1,6-bis(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)hexane (TPH). The structure of the monomer was elucidated by H-1, C-13, MR and mass analyses. The polymer P(TPH) and its copolymer with 3,4-ethylenedioxythiophene (P(TPH-co-EDOT)) were synthesized via potentiostatic electrochemical polymerization. Characterizations of the resulting polymers were performed by cyclic voltammetry (CV), FTIR, UV-vis spectroscopies; and condu...

Citation Formats

B. Bezgin, A. Yagan, and A. M. Önal, “Electrochemical co-polymerization of a novel fluorene derivative with 3,4-ethylenedioxythiophene,” JOURNAL OF ELECTROANALYTICAL CHEMISTRY, pp. 143–148, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43030.