Enhanced supercapacitors from hierarchical carbon nanotube and nanohorn architectures

2011-01-01
Hiralal, Pritesh
Wang, Haolan
Ünalan, Hüsnü Emrah
Liu, Yinglin
Rouvala, Markku
Wei, Di
Andrew, Piers
Amaratunga, Gehan A. J.
Supercapacitors fill the power and energy gap between electrolytic capacitors and batteries. The energy density for commercial supercapacitors is currently limited to similar to 5 Wh kg similar to 1. Enhancing the energy and power density of supercapacitors is of great interest as it would open up a much wider range of applications. In this work, thin film supercapacitors made of random networks of single-walled carbon nanotubes (SWNTs) were enhanced by the use of carbon nanoparticles of a size ideal to fill the pores in the SWNT network. These nanoparticles, termed carbon nanohorns (CNHs), provide a much enhanced surface area, whilst maintaining high permeability and porosity. We demonstrate the hierarchical use of carbon nanostructures in a controlled fashion, allowing an enhancement provided by both types of materials, high power density by the SWNTs and high energy density from the CNHs. SWNT films serve as an ideal template onto which CNHs are deposited, with a good size match, adhesion and charge transfer between particles of a single chemical species. This combination results in an enhanced specific capacitance and a reduced equivalent series resistance (ESR) compared to a capacitor made of either individual component. Additionally, the good binding properties of the hybrid material and the high electrical conductivity of the SWNTs permit the removal of both the binder and the charge collector, paving the way for thinner and lighter supercapacitors. These electrodes allow the fabrication of supercapacitors with novel properties. As an example, we demonstrate a semitransparent supercapacitor. These results demonstrate the possibilities that may be available for the enhancement of electrodes by tailoring and combining relevant materials hierarchically in multiple scales. Much potential remains in further enhancement through tailored hierarchical nanostructuring.
JOURNAL OF MATERIALS CHEMISTRY

Suggestions

Development of Nanocomposite Electrodes and Separators for Supercapacitors
Aydınlı, Alptekin; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2022-2-10)
Supercapacitors or electrochemical capacitors are known as one of the most promising energy storage systems for the 21st century. Having the potential to complement batteries, supercapacitors have received a lot of attention thanks to their high specific power and moderate energy densities. Supercapacitors have various application areas ranging from electric vehicles to portable systems and devices. In particular, their fast charge-discharge feature enables integration with consumer electronics, mobile devi...
Application of first principles calculations to the design ofrechargeable Li batteries
Ceder, Gerbrand; Aydınol, Mehmet Kadri; Kohan, Adrian (1997-05-01)
Rechargeable Li batteries consist of an anode, electrolyte, and cathode. The cathode is typically an oxide that intercalates Li al very low chemical potential ensuring a large open-cell voltage for the battery. We show how first-principles pseudopotential calculations can be used to predict the intercalation voltage for these materials. By means of a series of computational experiments on virtual structures, we identify the parameters that are important in determining the intercalation voltage of a compound...
Efficient integrated DC-DC converters for ultra-low voltage energy harvesters
Jayaweera, Herath; Muhtaroğlu, Ali; Sustainable Environment and Energy Systems (2017-8)
The self-starting on-chip fully integrated ultra-low voltage DC-DC converters for energy harvesting applications presented in literature generally have low efficiency and output power capacity. Any improvement in DC-DC converter circuits in terms of energy efficiency, output power, self-starting modes, and voltage gain will contribute significantly to the widespread application of energy harvesters. Two novel fully integrated, self-starting, ultra-low voltage DC-DC converter topologies and model based optim...
Development of cathode materials for li-ion batteries by sputter deposition
Erdoğan, Erdem Erkin; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2022-2-10)
The electrochemical performance of Li-ion batteries depends mostly on the cathode material. Cobalt has a huge impact on electrochemical properties and is widely used in cathode materials, but due to its toxicity and cost, recent research is focused on reducing the amount of cobalt in cathode materials. In this study, cathode active materials are produced by magnetron sputtering to obtain the optimum amount of cobalt while optimizing the electrochemical properties. Pechini sol-gel method is used to produce p...
Modification of single walled carbon nanotube thin films for supercapacitor electrodes
Durukan, Mete Batuhan; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2017)
Electrochemical capacitors, or supercapacitors, attracted a lot of attention in recent years due to their stability under numerous charge-discharge cycles, high charge discharge rates, and high power density when compared to batteries and conventional capacitors. Since their energy density is much lower than batteries, current research on supercapacitors is focused on improving the energy density through the development of novel active materials and innovative design of the electrodes. Carbon nanotubes are ...
Citation Formats
P. Hiralal et al., “Enhanced supercapacitors from hierarchical carbon nanotube and nanohorn architectures,” JOURNAL OF MATERIALS CHEMISTRY, pp. 17810–17815, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43403.