Mass transfer coefficient and interfacial area in three phase fluidization.

Date

1984

Author

Tosyalı, U Caner

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/4488

Collections

Suggestions

Mass transfer coefficients in mobile bed contacting. Özmelek, Levent; Department of Chemical Engineering (1985)
Mass transfer and kinetics in oxygen delignification Doğan, İsmail; Yücel, Hayrettin; Department of Chemical Engineering (2005) In this study, the kinetic analysis of oxygen delignification of Turkish southern hardwood Kraft pulp was carried out. Kraft pulp was obtained from Mopak Dalaman pulp and paper mill. The kinetic rate data were collected in a 1 L high pressure batch reactor. The delignification experiments were carried out under a wide range of industrially significant conditions of temperature (90, 100 and 110 oC), alkali charge (1, 3, 5% on oven dry pulp), and oxygen partial pressure (0.5, 3.5, 6.5 bar). In order to achiev...
Mass transfer studies in a gas-liquid contactor mixed with an injector Baylakoğlu, İlknur; Gürkan, Türkan; Department of Chemical Engineering (1987)
Mass transfer characteristics of conical ring packings / Karapars, Rezzan A; Department of Chemical Engineering (1973)
Mass transfer studies in a tube extractor. Çiftçiler, Gülay; Department of Chemical Engineering (1965)

Citation Formats

U. C. Tosyalı, “Mass transfer coefficient and interfacial area in three phase fluidization.,” Middle East Technical University, 1984.