Improvement of mechanical properties of propylene and diethylene glycol based polyesters by acrylonitrile

Deniz, Adnan


Improvement of mechanical and flame retardancy properties of biocomposites based on low density polyethylene and polylactic acid
Altun, Yasemin; Bayramlı, Erdal; Doğan, Mehmet Onur; Department of Polymer Science and Technology (2015)
The main objective of this study was to improve the mechanical and flame retardant properties of low density polyethylene (LDPE) and poly (lactic acid) (PLA) based biocomposites. Wood flour (WF) and jute fabric were used as the fillers. In the mechanical property improvement studies with LDPE, the effect of two compatibilizing agents MA (random terpolymer of ethylene, acrylic ester and maleic acid) and GMA (random terpolymer of ethylene, acrylic ester and glycidyl metacrylate) functionalized polymers at dif...
Improvement of physical and mechnical properties of styrenated alkyd resins by acrylonitrile.
Mirminachi, Fahimeh; Department of Chemical Engineering (1992)
Improvement of organoclay dispersion into polystyrene-based nanocomposites by incorporation of SBS and maleic anhydride-grafted SBS
Dike, Ali Sinan; Yılmazer, Ülkü (SAGE Publications, 2020-04-01)
In this study, organoclay-containing polystyrene (PS)-based nanocomposites were fabricated by extrusion in the presence of thermoplastic elastomer modifiers. Styrene-butadiene-styrene (SBS) rubber was used as the elastomeric compatibilizer and maleic anhydride (MA) was grafted onto SBS rubber at different ratios. Grafting was made via melt blending. Cloisite (R) 30B was used as the organoclay and it was added to PS and PS/SBS blends using a corotating twin-screw extruder, followed by injection molding. Clay...
Enhancement of electrical conductivity of plasma polymerized fluorene-type thin film under iodine and chlorine dopants
MANSUROGLU, Dogan; Uzun Kaymak, İlker Ümit (2017-08-31)
Electrical and optical properties of plasma-polymerized fluorene-type (C13H10) iodine-and chlorine-doped thin films are investigated. Fluorene-type thin films are produced using a mixture of biphenyl (C12H10) and methane (CH4) inside a single capacitively coupled radio frequency plasma system. The dopants are mixed with the plasmadirectly as vapor during the deposition. The chemical structures of the generated functional compounds, evaluated by a Fourier transform infrared spectroscopy, exhibit a changeable...
Improvement of flame retardance properties of unsaturated polysters
Öztürk, Şükrü; Gündüz, Güngör; Department of Chemical Engineering (1991)
Citation Formats
A. Deniz, “Improvement of mechanical properties of propylene and diethylene glycol based polyesters by acrylonitrile,” Middle East Technical University, 1990.