Anodization of titanium alloys for orthopedic applications

Date

2019-03-01

Author

Izmir, Merve
Ercan, Batur

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

232
views

0
downloads

In recent years, nanostructured oxide films on titanium alloy surfaces have gained significant interest due to their electrical, catalytic and biological properties. In literature, there is variety of different approaches to fabricate nanostructured oxide films. Among these methods, anodization technique, which allows fine-tuning of oxide film thickness, feature size, topography and chemistry, is one of the most popular approaches to fabricate nanostructured oxide films on titanium alloys, and it has been widely investigated for orthopedic applications. Briefly, anodization is the growth of a controlled oxide film on a metallic component attached to the anode of an electrochemical cell. This review provides an overview of the anodization technique to grow nanostructured oxide films on titanium and titanium alloys and summarizes the interactions between anodized titanium alloy surfaces with cells in terms of cellular adhesion, proliferation and differentiation. It will start with summarizing the mechanism of nanofeatured oxide fabrication on titanium alloys and then switch its focus on the latest findings for anodization of titanium alloys, including the use of fluoride free electrolytes and anodization of 3D titanium foams. The review will also highlight areas requiring further research to successfully translate anodized titanium alloys to clinics for orthopedic applications.

Subject Keywords

General Chemical Engineering

URI

https://hdl.handle.net/11511/47604

Journal

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING

DOI

https://doi.org/10.1007/s11705-018-1759-y

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Anodization of Ti6Al7Nb Alloy for Orthopaedic Applications İzmir, Merve; Ercan, Batur (null; 2017-12-31) In recent years, nanostructured oxide films on titanium alloy surfaces have gained significant interest due to their electrical, catalytic and biological properties. In literature, there is variety of different approaches to fabricate nanostructured oxide films. Among these methods, anodization technique, which allows fine-tuning of oxide film thickness, feature size, topography and chemistry, is one of the most popular approaches to fabricate nanostructured oxide films on titanium alloys, and it has been w...
Anodization of titanium alloys for orthopedic applications İzmir, Merve; Ercan, Batur; Department of Metallurgical and Materials Engineering (2018) In recent years, nanostructured oxide films on titanium alloy surfaces have gained significant interest due to their electrical, catalytic and biological properties, leading to an extensive effort to engineer nanostructured oxide films on titanium and titanium alloy surfaces. In literature, there is a variety of different approaches to fabricate nanostructured oxide films, including hydrothermal treatment, sol-gel synthesis, physical vapor deposition, electrodeposition, and etc. Among these methods, electro...
Synthesis and Characterization of Aluminum Containing Silica Aerogel Catalysts for Degradation of PLA Sivri, Seda; Dilek Hacıhabiboğlu, Çerağ; Sezgi, Naime Aslı (Walter de Gruyter GmbH, 2019-05-01) Aluminum loaded silica aerogel based catalysts were synthesized by impregnation of aluminum into silica aerogel produced using sol-gel method in different aluminum loadings (2.5-15 wt%) to investigate their performances in degradation of polylactic acid (PLA).
Investigation of concentration profiles in carbon nanotube production reactor Yalın, Mustafa; Özbelge, H. Önder; Department of Chemical Engineering (2009) Carbon nanotubes have received considerable attention since their discovery due to their novel properties. They have potential application areas in physics, chemistry and biology. Arc discharge, laser furnace, chemical vapor deposition and floating catalyst methods are the most commonly used methods to produce carbon nanotubes. Although carbon nanotubes have superior properties compared to other materials, they could not be used widely. The main reasons of this are that continuous and large scale production...
Electrospinning of polystyrene/butly rubber blends : a parametric study Göktaş, Ahmet; Gündüz, Güngör; Department of Chemical Engineering (2008) Nanofibers, which have high surface area to volume ratio and better mechanical properties, are nanomaterials that both industry and scientists have started to show great attention in the last two decades. They are used in many areas such as life and filtration sciences, sensors, and composite reinforcement etc. Among five main production types, electrospinning is the best candidate for further development with a wide range of opportunities to be applied to all types of polymers and ceramics. This method use...

Citation Formats

M. Izmir and B. Ercan, “Anodization of titanium alloys for orthopedic applications,” FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING, pp. 28–45, 2019, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/47604.