Determination of Transverse Shear Moduli of Composite Core Materials Through Sandwich Beam Tests

DETERMINATION OF TRAPPING CENTER PARAMETERS OF Tl2Ga2S3Se LAYERED CRYSTALS BY THERMALLY STIMULATED CURRENT MEASUREMENTS YILDIRIM, TACETTİN; Nasser, H. A.; Hasanlı, Nızamı (World Scientific Pub Co Pte Lt, 2010-06-10) We have carried out thermally stimulated current (TSC) measurements on as-grown Tl2Ga2S3Se layered single crystals in the temperature range 10-60 K with different heating rates of 0.6-1.5 K s(1). The data were analyzed by curve fitting, initial rise, and peak shape methods. The results were in good agreement with each other. Experimental evidence was obtained for trapping center in Tl2Ga2S3Se crystal with activation energy of 11 meV. The capture cross section and concentration of the traps were found to be ...
Determination of trapping center parameters in Tl2In2S3Se layered single crystals by thermally stimulated current measurements Güler, Işıkhan; Hasanlı, Nızamı (2009-07-01) As-grown Tl2In2S3Se layered single crystals were studied by thermally stimulated current measurements in the temperature range of 10-170K with different heating rates. Experimental data were analyzed according to various methods such as curve fitting and initial rise. The analysis of thermally stimulated current spectra registered at light excitation temperature T-0 = 10K revealed the trap level located at 30 meV. Attempt-to-escape frequency, concentration and capture cross section of the traps were determi...
Determination of displacement distributions in bolted steel tension elements using digital image techniques SÖZEN, ŞAHİN; Güler, Murat (Elsevier BV, 2011-12-01) Digital imaging methods have found a great interest in various engineering fields to study stress-deformation characteristics of materials. Recent enhancements in visual instrumentation with the availability of cost-effective hardware and software products make the digital imaging techniques a viable tool to replace direct strain or displacement measurement methods in engineering applications. In this study, deformation characteristics of bolted steel connections are investigated by calculating in-plane dis...
Determination of microstructural properties of pm Al-Sic composities by ultrasonic techniques Ataş, Esra; Gür, C. Hakan; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2000)
Determination of optical constants of silicon based amorphous films by UV-Visible transmittance and reflectance measurements Akaoğlu, Barış; Katırcıoğlu, Bayram; Department of Physics (1998)

Citation Formats

Ö. Şener, O. ATALAY, M. ATASOY, and A. Kayran, “Determination of Transverse Shear Moduli of Composite Core Materials Through Sandwich Beam Tests,” 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/48117.