EFFECTS OF TEMPERATURE AND PH ON THE SETTLEABILITY OF ACTIVATED-SLUDGE FLOCS

Date

1990-01-01

Author

Sanin, Faika Dilek

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

80
views

0
downloads

URI

https://hdl.handle.net/11511/53731

Journal

WATER SCIENCE AND TECHNOLOGY

Collections

Department of Environmental Engineering, Article

Suggestions

OpenMETU
Core

Effects of Temperature and Storage Conditions on the Total Phenolic Content and Antioxidant Activity of Microcapsules including Strawberry Phenolics Şümnü, Servet Gülüm; Öztop, Halil Mecit (null; 2018-04-13)
Effects of mix composition and water-cement ratio on the sulfate resistance of blended cements Sahmaran, M.; Kasap, O.; Duru, K.; Yaman, İsmail Özgür (2007-03-01) This paper presents an experimental investigation on the sulfate resistance of blended cements containing various amounts of natural pozzolan and/or Class-F fly ash. The performance of blended cements was monitored by exposing the prepared mortar specimens to a 5% Na2SO4 Solution for 78 weeks. For comparison, an ordinary Portland cement (produced with the same clinker as blended cements) and it sulfate resistant Portland cement (produced from a different clinker) were also used. In addition to the cement ch...
EFFECTS OF TEMPERATURE, PH AND DO CONCENTRATION ON SETTLEABILITY OF ACTIVATED-SLUDGE SURUCU, G; CETIN, FD (1990-03-01)
Effect of pretreatment and air temperature on the drying rate, rehydration capacity and color of artichoke Parin, Harika; Esin, Ali; Department of Food Engineering (2004) In this study, cleaned artichoke hearts belonging to three different ages were dried under constant external conditions at 50, 60 and 70°C using an air inlet velocity of 8.1 m/s. The sample to be dried was pretreated either by keeping it in distilled water or 1% (w/v) ascorbic acid or sodium bisulfite solutions for 30 minutes at the corresponding drying temperatures. Further, for comparison, the use of citric acid solution, increasing the concentrations of the solutions, reducing the pretreatment time, effe...
Effects of pH and cobalt concentration on the properties of nickel cobalt alloy plating Başkan, Mertcan; Erdoğan, Metehan; Karakaya, İshak (null; 2016-11-01) Nickel-Cobalt alloys are among the most prominent materials due to their magnetic properties, wear resistance, thermal conductivity and electrocatalytic activities. Although nickel and/or nickel-cobalt alloys have been plated from Watts solution for a long time, today, especially for the engineering applications, nickel sulfamate based solutions are commonly preferred due to the advantages of low internal stress and high deposition rate. The properties of nickelcobalt alloy platings are directly related to ...

Citation Formats

F. D. Sanin, “EFFECTS OF TEMPERATURE AND PH ON THE SETTLEABILITY OF ACTIVATED-SLUDGE FLOCS,” WATER SCIENCE AND TECHNOLOGY, pp. 249–254, 1990, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/53731.