Behavioral Modeling of Asymmetric Intermodulation Distortion of Nonlinear Amplifier

2010-07-08
Yuzer, A. H.
Demir, Şimşek
In this study, a behavioural modelling is proposed to model asymmetric IMD components produced in the two tone excitation of nonlinear amplifiers. Model parameters are extracted based on single tone and two-tone measurement results. Then measurement results and model predictions are compared for a four-tone signal.

Suggestions

A nonlinear model for amplifiers with memory
Yuzer, Ahmet Hayrettin; Demir, Şimşek (2010-12-20)
In this study an improved behavioral modeling including even order terms is proposed to model asymmetric IMD components observed in the multi-tone excitation of nonlinear amplifiers. Only odd order model (OOM) and even order introduced model (EOM), proposed model, are constructed and compared for a sample amplifier. It is showed that introducing even order term is improved the model validity range and accuracy in addition to the decrease model polinomial order. © 2010 IEEE.
Analytical and Experimental Study on Actuation Time of Displacement Amplified Electromagnetic Actuator
Nabae, Hiroyuki; Karaguzel, A. Tugay; Endo, Gen; Suzumori, Koichi (2017-07-07)
This paper describes an analytical study undertaken on an electromagnetic actuator design with a displacement amplification mechanism by explaining the physical modeling and formulizing the actuation time of the actuator in terms of physical model variables. This is followed by an experimental investigation on the actuation time of the electromagnetic actuator. Increasing the gap between the electromagnet and armatures to increase the stroke of the electromagnetic actuator resulted in a drastic loss of the ...
Nonlinear fiber modeling of steel-concrete partially composite beams with channel shear connectors
Öztürk, Alper; Baran, Eray; Department of Civil Engineering (2017)
The purpose of this study is to develop a nonlinear fiber-based finite element model of steel-concrete composite beams. The model was developed in OpenSees utilizing the available finite element formulations and the readily available uniaxial material constitutive relations. The model employed beam elements for the steel beam and the concrete slab, while zero-length connector elements were used for the steel-concrete interface. The channel shear connector response used in numerical models was based on the p...
Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines
Baykal, Cem; Ciğeroğlu, Ender; Yazıcıoğlu, Yiğit (2020-01-01)
In this study, a nonlinear 3-D mathematical model for horizontal drum type washing machines is developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using Harmonic Balance Method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs and damp...
Analytical modeling of asymmetric multi-segment rotor - bearing systems with Timoshenko beam model including gyroscopic moments
Özşahin, Orkun; Özgüven, Hasan Nevzat (2014-11-01)
In this study, analytical modeling and an analysis approach for asymmetric multi-segment rotor bearing systems are presented. Timoshenko beam model which includes the effect of gyroscopic moments is employed for modeling rotor segments. Instead of applying FEM, sub-segment Frequency Response Functions (FRFs) are obtained analytically, and sub-segment FRFs obtained are coupled by using receptance coupling method. Bearing properties are included into system dynamics by employing structural modification techni...
Citation Formats
A. H. Yuzer and Ş. Demir, “Behavioral Modeling of Asymmetric Intermodulation Distortion of Nonlinear Amplifier,” 2010, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54240.