New cycle counting method for the assessment of low cycle fatigue in steel H-piles of integral bridges

2016-06-30

Suggestions

An advisory system for tall building management
ALKOC, E; ERBATUR, F (1993-05-19)
Improved Seismic Response of Multisimple-Span Skewed Bridges Retrofitted with Link Slabs
Sevgili, Gizem; Caner, Alp (American Society of Civil Engineers (ASCE), 2009-11-01)
Results of a recent bridge inventory evaluation indicated that about 50% of Turkish highway bridges have more than 30 degrees of skew angle and can be classified as irregular bridges. During the recent major earthquake in Turkey, multisimple-span bridges with continuous decks and link slabs performed well even though these bridges were in the vicinity of the fault line. This study aims to evaluate the improvements in seismic response of skew bridges in terms of forces and displacements when link slabs are a...
A simplified non-linear procedure for buildings with shear walls
TEKELİ, Hamide; Atimtay, Ergin (Thomas Telford Ltd., 2015-01-01)
A simple and easily applicable analytical method is proposed to obtain the capacity curve of buildings with shear walls as the first stage of a seismic pushover analysis. The method is based on controlling the curvature distribution of shear walls. Accuracy of the method was examined based on data of three sample buildings compiled from the literature. The buildings have different floor areas, number of storeys and cross-sectional areas of shear walls. The method can be economically used with respect to bot...
A numerical study on local buckling and energy dissipation of CHS seismic bracing
Kusyilmaz, Ahmet; Topkaya, Cem (Elsevier BV, 2011-08-01)
Seismic provisions for steel buildings present limiting width-thickness and slenderness ratios for bracing members, most of which were established based on experimental observations. A finite element study has been undertaken to evaluate these limits for pin-ended circular hollow section (CHS) steel braces. Uncertainties in modeling and quantification arise in the simulation of cyclic brace buckling. A finite element modeling procedure was developed and calibrated using existing experimental data. Sensitivi...
Novel testing procedure for assessment of quality of foamed warm mix asphalt binders
Öztürk, Hande Işık (American Society of Civil Engineers (ASCE), 2014-01-01)
This paper presents an image-based testing system called the asphalt foam collapse test (AFCT) to measure parameters that indicate the quality of foamed warm mix asphalt (WMA) binders. The AFCT was used to measure and evaluate various potential quality indicators such as expansion ratio (ER), half-life (HL), and foam index (FI). In addition, this paper introduces a method to calculate the bubble size distribution (BSD) of the bubbles in the foamed WMA. The BSD is then used to introduce a new parameter calle...
Citation Formats
M. Dicleli, “New cycle counting method for the assessment of low cycle fatigue in steel H-piles of integral bridges,” 2016, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54881.