AN INTERFEROMETRIC TECHNIQUE FOR MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT

Date

2010-10-20

Author

Yildirim, Murat
Dursunkaya, Zafer
Okutucu Özyurt, Hanife Tuba

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

149
views

0
downloads

The aim of this study is to develop an interferometric technique to measure micron level clearances occurring in small piston-cylinder arrangements; such as hermetically sealed compressors. A Cartesian model of the piston cylinder arrangement is manufactured and lateral and vertical motions are generated via a step motor, and micrometers, respectively, to simulate the piston motion and the change of clearance during the motion. Experiments are conducted in air and a lubricant. Measurements show the important effect of surface waviness of the mirror and the effect of the motion of the carriage at micron level measurements.

Subject Keywords

Film Thickness

URI

https://hdl.handle.net/11511/55363

Conference Name

STLE/ASME International Joint Tribology Conference

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

DEVELOPMENT OF AN INTERFEROMETRIC TECHNIQUE TO BE USED IN MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT Yildirim, Murat; Dursunkaya, Zafer; Okutucu Özyurt, Hanife Tuba (2009-10-21) The aim of this study is to develop an interferometric technique to measure micron level clearances occurring in small piston-cylinder arrangements; such as hermetically sealed compressors. A Cartesian model of the piston cylinder arrangement is manufactured and lateral and vertical motions are generated via a step motor, and micrometers, respectively, to simulate the piston motion and the change of clearance during the motion. Experiments are conducted in air and a lubricant. Measurements show the importan...
A sequential classification algorithm for autoregressive processes Otlu, Güneş; Candan, Çağatay; Çiloğlu, Tolga; Department of Electrical and Electronics Engineering (2011) This study aims to present a sequential method for the classification of the autoregressive processes. Different from the conventional detectors having fixed sample size, the method uses Wald’s sequential probability ratio test and has a variable sample size. It is shown that the suggested method produces the classification decisions much earlier than fixed sample size alternative on the average. The proposed method is extended to the case when processes have unknown variance. The effects of the unknown pro...
An investigation of the neural correlates of purchase behavior through fNIRS Çakır, Murat Perit; Girisken, Yener; Yurdakul, Dicle (2018-01-01) Purpose This study aims to explore the plausibility of the functional near-infrared spectroscopy (fNIRS) methodology for neuromarketing applications and develop a neurophysiologically-informed model of purchasing behavior based on fNIRS measurements.
A Microbolometer detector based on a sol-gel technology Dervişoğlu, Özgecan; Akın, Tayfun; Durucan, Caner; Department of Micro and Nanotechnology (2013) The objective of this study is to develop a high performance bolometric material for microbolometers. The bolometric material to be developed was chosen as vanadium oxide due to its high temperature coefficient of resistance (TCR), low 1/f noise performance, and read out integrated circuit (ROIC) compatible resistivity. Among various deposition techniques, sol-gel method was decided to be implemented because of its various advantages such as simpler instrumentation, attainability of good chemical homogeneit...
A methodology for lining design of circular mine shafts in different rock masses Öztürk, Hasan (2016-09-01) In this study, the finite element numerical modelling of 2D shaft sections in a Hoek-Brown medium are carried out in a non-hydrostatic stress state in an attempt to predict pressures developing around mine shafts. An iterative process of applying support pressure until observing no failure zone around the shaft is used to simulate the required lining support pressure for different shaft models. Later, regression analysis is carried out to find a generic shaft pressure equation representing the rock mass and...

Citation Formats

M. Yildirim, Z. Dursunkaya, and H. T. Okutucu Özyurt, “AN INTERFEROMETRIC TECHNIQUE FOR MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT,” presented at the STLE/ASME International Joint Tribology Conference, San Francisco, CA, 2010, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/55363.