A Novel Experimental Method for Microwave Dielectric Characterization of Flexible or Rigid Thin Sheets

Date

2017-06-09

Author

Hajisaeid, Ehsan
Dericioğlu, Arcan Fehmi
Akyurtlu, Alkim

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

145
views

0
downloads

This work demonstrates a novel experimental method coupled with analytical extraction codes to determine dielectric properties of flexible or rigid thin sheets in a waveguide measurement setup. This method is based on measuring the transmission phase shift with and without the material under test which is placed in the middle of two polymeric sample holder blocks. These blocks are 3D printed according to the thickness of the thin sheet sample and the complex dielectric properties are calculated by removing the unwanted sample holder block effects. The method was verified by measuring four commercially available thin sheets in an X-band rectangular waveguide.

Subject Keywords

Complex permittivity, Rectangular waveguide, Flexible thin sheets, X-band

URI

https://hdl.handle.net/11511/55686

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A Novel Numerical Technique for Analyzing Metasurfaces ÖZGÜN, ÖZLEM; Mittra, Raj; Kuzuoğlu, Mustafa (2019-12-31) This work presents a novel technique for efficient numerical modeling of electromagnetic scattering from metasurfaces comprising of truncated periodic or locally-varying quasi-periodic surfaces. The proposed technique hybridizes the periodic Finite Element Method (FEM) with the Method of Moments (MoM) to develop an algorithm far more efficient than conventional numerical methods for electromagnetic scattering from arbitrary objects. The key feature of the proposed algorithm is that it takes advantage of the...
A Novel Characterization Method for MEMS Based Electrostatic Resonators for Q Enhancement and Feedthrough Current Elimination AYDIN GÖL, EBRU; Kangul, M.; Gökce, Fuat; Zorlu, O.; Külah, Haluk (2016-11-03) This paper introduces a new technique for electrostatic resonance characterization based on 2nd harmonic distortion terms at the output current. Mathematical analysis of the output current shows that the 2nd harmonic component exhibits higher quality factor (Q) than the 1st harmonic. Besides, output current to feedthrough current ratio is higher in the 2nd harmonic term. Experimental results show that the Q of the resonating system is enhanced by 66% with 2nd harmonic operation. Moreover, the resonance peak...
A Novel System for Measuring Solids Dispersion In Circulating Fluidized Beds Külah, Görkem; Bi, H T; Lim, C J; Grace, J R (null; 2008-05-08) A novel, simple and accurate experimental measurement system with fast response was developed to measure transient local solid tracer concentration distributions to obtain information on solids mixing and dispersion in risers of circulating fluidized beds operating at a wide range of operating conditions. Phosphorescent-coated FCC particles, used as the tracer, were activated by high intensity UV light and injected at the return leg of high-density circulating fluidized bed (HDCFB) unit. The tracer concentr...
A Novel Method for Fabricating MEMS Three-Axis Accelerometers using Low Temperature Au-Sn Eutectic Bonding Tez, Serdar; Torunbalci, Mustafa Mert; Akın, Tayfun (2016-11-03) This paper presents a novel method for the fabrication of three-axis capacitive MEMS accelerometers by using low-temperature Au-Sn eutectic bonding that is applied to form a glass-silicon-glass multi-stack. The proposed method provides the implementation of individual in-plane and out-of-plane accelerometer elements in the same die using a glass-silicon-glass multi-stack structure formed at temperatures as low as 300 degrees C while still ensuring the advantages of the previous approaches such as the voltag...
A numerical method for predicting depth of heat affected zone in EDM process for AISI H13 tool steel Shabgard, M. R.; Seyedzavvar, M.; Oliaei, S. Nadimi Bavil; Ivanov, A. (2011-07-01) This study presents a finite element model (FEM) to model temperature distribution for AISI H13 tool steel workpiece in electrical discharge machining (EDM) at different machining parameters (pulse current, pulse on-time, temperature-sensitive material properties, size of heat source, and material flushing efficiency). Scanning electron microscopy (SEM) with energy dispersive x-ray (EDX) and micro-hardness tests were used to validate accuracy of FEM predictions. Increasing pulse on-time leads to a higher de...

Citation Formats

E. Hajisaeid, A. F. Dericioğlu, and A. Akyurtlu, “A Novel Experimental Method for Microwave Dielectric Characterization of Flexible or Rigid Thin Sheets,” 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/55686.